1 /*
2 * Copyright 1997-2008 Sun Microsystems, Inc. All Rights Reserved.
3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 *
5 * This code is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 only, as
7 * published by the Free Software Foundation.
8 *
9 * This code is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * version 2 for more details (a copy is included in the LICENSE file that
13 * accompanied this code).
14 *
15 * You should have received a copy of the GNU General Public License version
16 * 2 along with this work; if not, write to the Free Software Foundation,
17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 *
19 * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
20 * CA 95054 USA or visit www.sun.com if you need additional information or
21 * have any questions.
22 *
23 */
24
25 #include "incls/_precompiled.incl"
26 #include "incls/_assembler_sparc.cpp.incl"
27
28 // Implementation of Address
29
30 Address::Address( addr_type t, int which ) {
31 switch (t) {
32 case extra_in_argument:
33 case extra_out_argument:
34 _base = t == extra_in_argument ? FP : SP;
35 _hi = 0;
36 // Warning: In LP64 mode, _disp will occupy more than 10 bits.
37 // This is inconsistent with the other constructors but op
38 // codes such as ld or ldx, only access disp() to get their
39 // simm13 argument.
40 _disp = ((which - Argument::n_register_parameters + frame::memory_parameter_word_sp_offset) * BytesPerWord) + STACK_BIAS;
41 break;
42 default:
43 ShouldNotReachHere();
44 break;
45 }
46 }
47
48 static const char* argumentNames[][2] = {
49 {"A0","P0"}, {"A1","P1"}, {"A2","P2"}, {"A3","P3"}, {"A4","P4"},
50 {"A5","P5"}, {"A6","P6"}, {"A7","P7"}, {"A8","P8"}, {"A9","P9"},
51 {"A(n>9)","P(n>9)"}
52 };
53
54 const char* Argument::name() const {
55 int nofArgs = sizeof argumentNames / sizeof argumentNames[0];
56 int num = number();
57 if (num >= nofArgs) num = nofArgs - 1;
58 return argumentNames[num][is_in() ? 1 : 0];
59 }
60
61 void Assembler::print_instruction(int inst) {
62 const char* s;
63 switch (inv_op(inst)) {
64 default: s = "????"; break;
65 case call_op: s = "call"; break;
66 case branch_op:
67 switch (inv_op2(inst)) {
68 case bpr_op2: s = "bpr"; break;
69 case fb_op2: s = "fb"; break;
70 case fbp_op2: s = "fbp"; break;
71 case br_op2: s = "br"; break;
72 case bp_op2: s = "bp"; break;
73 case cb_op2: s = "cb"; break;
74 default: s = "????"; break;
75 }
76 }
77 ::tty->print("%s", s);
78 }
79
80
81 // Patch instruction inst at offset inst_pos to refer to dest_pos
82 // and return the resulting instruction.
83 // We should have pcs, not offsets, but since all is relative, it will work out
84 // OK.
85 int Assembler::patched_branch(int dest_pos, int inst, int inst_pos) {
86
87 int m; // mask for displacement field
88 int v; // new value for displacement field
89 const int word_aligned_ones = -4;
90 switch (inv_op(inst)) {
91 default: ShouldNotReachHere();
92 case call_op: m = wdisp(word_aligned_ones, 0, 30); v = wdisp(dest_pos, inst_pos, 30); break;
93 case branch_op:
94 switch (inv_op2(inst)) {
95 case bpr_op2: m = wdisp16(word_aligned_ones, 0); v = wdisp16(dest_pos, inst_pos); break;
96 case fbp_op2: m = wdisp( word_aligned_ones, 0, 19); v = wdisp( dest_pos, inst_pos, 19); break;
97 case bp_op2: m = wdisp( word_aligned_ones, 0, 19); v = wdisp( dest_pos, inst_pos, 19); break;
98 case fb_op2: m = wdisp( word_aligned_ones, 0, 22); v = wdisp( dest_pos, inst_pos, 22); break;
99 case br_op2: m = wdisp( word_aligned_ones, 0, 22); v = wdisp( dest_pos, inst_pos, 22); break;
100 case cb_op2: m = wdisp( word_aligned_ones, 0, 22); v = wdisp( dest_pos, inst_pos, 22); break;
101 default: ShouldNotReachHere();
102 }
103 }
104 return inst & ~m | v;
105 }
106
107 // Return the offset of the branch destionation of instruction inst
108 // at offset pos.
109 // Should have pcs, but since all is relative, it works out.
110 int Assembler::branch_destination(int inst, int pos) {
111 int r;
112 switch (inv_op(inst)) {
113 default: ShouldNotReachHere();
114 case call_op: r = inv_wdisp(inst, pos, 30); break;
115 case branch_op:
116 switch (inv_op2(inst)) {
117 case bpr_op2: r = inv_wdisp16(inst, pos); break;
118 case fbp_op2: r = inv_wdisp( inst, pos, 19); break;
119 case bp_op2: r = inv_wdisp( inst, pos, 19); break;
120 case fb_op2: r = inv_wdisp( inst, pos, 22); break;
121 case br_op2: r = inv_wdisp( inst, pos, 22); break;
122 case cb_op2: r = inv_wdisp( inst, pos, 22); break;
123 default: ShouldNotReachHere();
124 }
125 }
126 return r;
127 }
128
129 int AbstractAssembler::code_fill_byte() {
130 return 0x00; // illegal instruction 0x00000000
131 }
132
133 Assembler::Condition Assembler::reg_cond_to_cc_cond(Assembler::RCondition in) {
134 switch (in) {
135 case rc_z: return equal;
136 case rc_lez: return lessEqual;
137 case rc_lz: return less;
138 case rc_nz: return notEqual;
139 case rc_gz: return greater;
140 case rc_gez: return greaterEqual;
141 default:
142 ShouldNotReachHere();
143 }
144 return equal;
145 }
146
147 // Generate a bunch 'o stuff (including v9's
148 #ifndef PRODUCT
149 void Assembler::test_v9() {
150 add( G0, G1, G2 );
151 add( G3, 0, G4 );
152
153 addcc( G5, G6, G7 );
154 addcc( I0, 1, I1 );
155 addc( I2, I3, I4 );
156 addc( I5, -1, I6 );
157 addccc( I7, L0, L1 );
158 addccc( L2, (1 << 12) - 2, L3 );
159
160 Label lbl1, lbl2, lbl3;
161
162 bind(lbl1);
163
164 bpr( rc_z, true, pn, L4, pc(), relocInfo::oop_type );
165 delayed()->nop();
166 bpr( rc_lez, false, pt, L5, lbl1);
167 delayed()->nop();
168
169 fb( f_never, true, pc() + 4, relocInfo::none);
170 delayed()->nop();
171 fb( f_notEqual, false, lbl2 );
172 delayed()->nop();
173
174 fbp( f_notZero, true, fcc0, pn, pc() - 4, relocInfo::none);
175 delayed()->nop();
176 fbp( f_lessOrGreater, false, fcc1, pt, lbl3 );
177 delayed()->nop();
178
179 br( equal, true, pc() + 1024, relocInfo::none);
180 delayed()->nop();
181 br( lessEqual, false, lbl1 );
182 delayed()->nop();
183 br( never, false, lbl1 );
184 delayed()->nop();
185
186 bp( less, true, icc, pn, pc(), relocInfo::none);
187 delayed()->nop();
188 bp( lessEqualUnsigned, false, xcc, pt, lbl2 );
189 delayed()->nop();
190
191 call( pc(), relocInfo::none);
192 delayed()->nop();
193 call( lbl3 );
194 delayed()->nop();
195
196
197 casa( L6, L7, O0 );
198 casxa( O1, O2, O3, 0 );
199
200 udiv( O4, O5, O7 );
201 udiv( G0, (1 << 12) - 1, G1 );
202 sdiv( G1, G2, G3 );
203 sdiv( G4, -((1 << 12) - 1), G5 );
204 udivcc( G6, G7, I0 );
205 udivcc( I1, -((1 << 12) - 2), I2 );
206 sdivcc( I3, I4, I5 );
207 sdivcc( I6, -((1 << 12) - 0), I7 );
208
209 done();
210 retry();
211
212 fadd( FloatRegisterImpl::S, F0, F1, F2 );
213 fsub( FloatRegisterImpl::D, F34, F0, F62 );
214
215 fcmp( FloatRegisterImpl::Q, fcc0, F0, F60);
216 fcmpe( FloatRegisterImpl::S, fcc1, F31, F30);
217
218 ftox( FloatRegisterImpl::D, F2, F4 );
219 ftoi( FloatRegisterImpl::Q, F4, F8 );
220
221 ftof( FloatRegisterImpl::S, FloatRegisterImpl::Q, F3, F12 );
222
223 fxtof( FloatRegisterImpl::S, F4, F5 );
224 fitof( FloatRegisterImpl::D, F6, F8 );
225
226 fmov( FloatRegisterImpl::Q, F16, F20 );
227 fneg( FloatRegisterImpl::S, F6, F7 );
228 fabs( FloatRegisterImpl::D, F10, F12 );
229
230 fmul( FloatRegisterImpl::Q, F24, F28, F32 );
231 fmul( FloatRegisterImpl::S, FloatRegisterImpl::D, F8, F9, F14 );
232 fdiv( FloatRegisterImpl::S, F10, F11, F12 );
233
234 fsqrt( FloatRegisterImpl::S, F13, F14 );
235
236 flush( L0, L1 );
237 flush( L2, -1 );
238
239 flushw();
240
241 illtrap( (1 << 22) - 2);
242
243 impdep1( 17, (1 << 19) - 1 );
244 impdep2( 3, 0 );
245
246 jmpl( L3, L4, L5 );
247 delayed()->nop();
248 jmpl( L6, -1, L7, Relocation::spec_simple(relocInfo::none));
249 delayed()->nop();
250
251
252 ldf( FloatRegisterImpl::S, O0, O1, F15 );
253 ldf( FloatRegisterImpl::D, O2, -1, F14 );
254
255
256 ldfsr( O3, O4 );
257 ldfsr( O5, -1 );
258 ldxfsr( O6, O7 );
259 ldxfsr( I0, -1 );
260
261 ldfa( FloatRegisterImpl::D, I1, I2, 1, F16 );
262 ldfa( FloatRegisterImpl::Q, I3, -1, F36 );
263
264 ldsb( I4, I5, I6 );
265 ldsb( I7, -1, G0 );
266 ldsh( G1, G3, G4 );
267 ldsh( G5, -1, G6 );
268 ldsw( G7, L0, L1 );
269 ldsw( L2, -1, L3 );
270 ldub( L4, L5, L6 );
271 ldub( L7, -1, O0 );
272 lduh( O1, O2, O3 );
273 lduh( O4, -1, O5 );
274 lduw( O6, O7, G0 );
275 lduw( G1, -1, G2 );
276 ldx( G3, G4, G5 );
277 ldx( G6, -1, G7 );
278 ldd( I0, I1, I2 );
279 ldd( I3, -1, I4 );
280
281 ldsba( I5, I6, 2, I7 );
282 ldsba( L0, -1, L1 );
283 ldsha( L2, L3, 3, L4 );
284 ldsha( L5, -1, L6 );
285 ldswa( L7, O0, (1 << 8) - 1, O1 );
286 ldswa( O2, -1, O3 );
287 lduba( O4, O5, 0, O6 );
288 lduba( O7, -1, I0 );
289 lduha( I1, I2, 1, I3 );
290 lduha( I4, -1, I5 );
291 lduwa( I6, I7, 2, L0 );
292 lduwa( L1, -1, L2 );
293 ldxa( L3, L4, 3, L5 );
294 ldxa( L6, -1, L7 );
295 ldda( G0, G1, 4, G2 );
296 ldda( G3, -1, G4 );
297
298 ldstub( G5, G6, G7 );
299 ldstub( O0, -1, O1 );
300
301 ldstuba( O2, O3, 5, O4 );
302 ldstuba( O5, -1, O6 );
303
304 and3( I0, L0, O0 );
305 and3( G7, -1, O7 );
306 andcc( L2, I2, G2 );
307 andcc( L4, -1, G4 );
308 andn( I5, I6, I7 );
309 andn( I6, -1, I7 );
310 andncc( I5, I6, I7 );
311 andncc( I7, -1, I6 );
312 or3( I5, I6, I7 );
313 or3( I7, -1, I6 );
314 orcc( I5, I6, I7 );
315 orcc( I7, -1, I6 );
316 orn( I5, I6, I7 );
317 orn( I7, -1, I6 );
318 orncc( I5, I6, I7 );
319 orncc( I7, -1, I6 );
320 xor3( I5, I6, I7 );
321 xor3( I7, -1, I6 );
322 xorcc( I5, I6, I7 );
323 xorcc( I7, -1, I6 );
324 xnor( I5, I6, I7 );
325 xnor( I7, -1, I6 );
326 xnorcc( I5, I6, I7 );
327 xnorcc( I7, -1, I6 );
328
329 membar( Membar_mask_bits(StoreStore | LoadStore | StoreLoad | LoadLoad | Sync | MemIssue | Lookaside ) );
330 membar( StoreStore );
331 membar( LoadStore );
332 membar( StoreLoad );
333 membar( LoadLoad );
334 membar( Sync );
335 membar( MemIssue );
336 membar( Lookaside );
337
338 fmov( FloatRegisterImpl::S, f_ordered, true, fcc2, F16, F17 );
339 fmov( FloatRegisterImpl::D, rc_lz, L5, F18, F20 );
340
341 movcc( overflowClear, false, icc, I6, L4 );
342 movcc( f_unorderedOrEqual, true, fcc2, (1 << 10) - 1, O0 );
343
344 movr( rc_nz, I5, I6, I7 );
345 movr( rc_gz, L1, -1, L2 );
346
347 mulx( I5, I6, I7 );
348 mulx( I7, -1, I6 );
349 sdivx( I5, I6, I7 );
350 sdivx( I7, -1, I6 );
351 udivx( I5, I6, I7 );
352 udivx( I7, -1, I6 );
353
354 umul( I5, I6, I7 );
355 umul( I7, -1, I6 );
356 smul( I5, I6, I7 );
357 smul( I7, -1, I6 );
358 umulcc( I5, I6, I7 );
359 umulcc( I7, -1, I6 );
360 smulcc( I5, I6, I7 );
361 smulcc( I7, -1, I6 );
362
363 mulscc( I5, I6, I7 );
364 mulscc( I7, -1, I6 );
365
366 nop();
367
368
369 popc( G0, G1);
370 popc( -1, G2);
371
372 prefetch( L1, L2, severalReads );
373 prefetch( L3, -1, oneRead );
374 prefetcha( O3, O2, 6, severalWritesAndPossiblyReads );
375 prefetcha( G2, -1, oneWrite );
376
377 rett( I7, I7);
378 delayed()->nop();
379 rett( G0, -1, relocInfo::none);
380 delayed()->nop();
381
382 save( I5, I6, I7 );
383 save( I7, -1, I6 );
384 restore( I5, I6, I7 );
385 restore( I7, -1, I6 );
386
387 saved();
388 restored();
389
390 sethi( 0xaaaaaaaa, I3, Relocation::spec_simple(relocInfo::none));
391
392 sll( I5, I6, I7 );
393 sll( I7, 31, I6 );
394 srl( I5, I6, I7 );
395 srl( I7, 0, I6 );
396 sra( I5, I6, I7 );
397 sra( I7, 30, I6 );
398 sllx( I5, I6, I7 );
399 sllx( I7, 63, I6 );
400 srlx( I5, I6, I7 );
401 srlx( I7, 0, I6 );
402 srax( I5, I6, I7 );
403 srax( I7, 62, I6 );
404
405 sir( -1 );
406
407 stbar();
408
409 stf( FloatRegisterImpl::Q, F40, G0, I7 );
410 stf( FloatRegisterImpl::S, F18, I3, -1 );
411
412 stfsr( L1, L2 );
413 stfsr( I7, -1 );
414 stxfsr( I6, I5 );
415 stxfsr( L4, -1 );
416
417 stfa( FloatRegisterImpl::D, F22, I6, I7, 7 );
418 stfa( FloatRegisterImpl::Q, F44, G0, -1 );
419
420 stb( L5, O2, I7 );
421 stb( I7, I6, -1 );
422 sth( L5, O2, I7 );
423 sth( I7, I6, -1 );
424 stw( L5, O2, I7 );
425 stw( I7, I6, -1 );
426 stx( L5, O2, I7 );
427 stx( I7, I6, -1 );
428 std( L5, O2, I7 );
429 std( I7, I6, -1 );
430
431 stba( L5, O2, I7, 8 );
432 stba( I7, I6, -1 );
433 stha( L5, O2, I7, 9 );
434 stha( I7, I6, -1 );
435 stwa( L5, O2, I7, 0 );
436 stwa( I7, I6, -1 );
437 stxa( L5, O2, I7, 11 );
438 stxa( I7, I6, -1 );
439 stda( L5, O2, I7, 12 );
440 stda( I7, I6, -1 );
441
442 sub( I5, I6, I7 );
443 sub( I7, -1, I6 );
444 subcc( I5, I6, I7 );
445 subcc( I7, -1, I6 );
446 subc( I5, I6, I7 );
447 subc( I7, -1, I6 );
448 subccc( I5, I6, I7 );
449 subccc( I7, -1, I6 );
450
451 swap( I5, I6, I7 );
452 swap( I7, -1, I6 );
453
454 swapa( G0, G1, 13, G2 );
455 swapa( I7, -1, I6 );
456
457 taddcc( I5, I6, I7 );
458 taddcc( I7, -1, I6 );
459 taddcctv( I5, I6, I7 );
460 taddcctv( I7, -1, I6 );
461
462 tsubcc( I5, I6, I7 );
463 tsubcc( I7, -1, I6 );
464 tsubcctv( I5, I6, I7 );
465 tsubcctv( I7, -1, I6 );
466
467 trap( overflowClear, xcc, G0, G1 );
468 trap( lessEqual, icc, I7, 17 );
469
470 bind(lbl2);
471 bind(lbl3);
472
473 code()->decode();
474 }
475
476 // Generate a bunch 'o stuff unique to V8
477 void Assembler::test_v8_onlys() {
478 Label lbl1;
479
480 cb( cp_0or1or2, false, pc() - 4, relocInfo::none);
481 delayed()->nop();
482 cb( cp_never, true, lbl1);
483 delayed()->nop();
484
485 cpop1(1, 2, 3, 4);
486 cpop2(5, 6, 7, 8);
487
488 ldc( I0, I1, 31);
489 ldc( I2, -1, 0);
490
491 lddc( I4, I4, 30);
492 lddc( I6, 0, 1 );
493
494 ldcsr( L0, L1, 0);
495 ldcsr( L1, (1 << 12) - 1, 17 );
496
497 stc( 31, L4, L5);
498 stc( 30, L6, -(1 << 12) );
499
500 stdc( 0, L7, G0);
501 stdc( 1, G1, 0 );
502
503 stcsr( 16, G2, G3);
504 stcsr( 17, G4, 1 );
505
506 stdcq( 4, G5, G6);
507 stdcq( 5, G7, -1 );
508
509 bind(lbl1);
510
511 code()->decode();
512 }
513 #endif
514
515 // Implementation of MacroAssembler
516
517 void MacroAssembler::null_check(Register reg, int offset) {
518 if (needs_explicit_null_check((intptr_t)offset)) {
519 // provoke OS NULL exception if reg = NULL by
520 // accessing M[reg] w/o changing any registers
521 ld_ptr(reg, 0, G0);
522 }
523 else {
524 // nothing to do, (later) access of M[reg + offset]
525 // will provoke OS NULL exception if reg = NULL
526 }
527 }
528
529 // Ring buffer jumps
530
531 #ifndef PRODUCT
532 void MacroAssembler::ret( bool trace ) { if (trace) {
533 mov(I7, O7); // traceable register
534 JMP(O7, 2 * BytesPerInstWord);
535 } else {
536 jmpl( I7, 2 * BytesPerInstWord, G0 );
537 }
538 }
539
540 void MacroAssembler::retl( bool trace ) { if (trace) JMP(O7, 2 * BytesPerInstWord);
541 else jmpl( O7, 2 * BytesPerInstWord, G0 ); }
542 #endif /* PRODUCT */
543
544
545 void MacroAssembler::jmp2(Register r1, Register r2, const char* file, int line ) {
546 assert_not_delayed();
547 // This can only be traceable if r1 & r2 are visible after a window save
548 if (TraceJumps) {
549 #ifndef PRODUCT
550 save_frame(0);
551 verify_thread();
552 ld(G2_thread, in_bytes(JavaThread::jmp_ring_index_offset()), O0);
553 add(G2_thread, in_bytes(JavaThread::jmp_ring_offset()), O1);
554 sll(O0, exact_log2(4*sizeof(intptr_t)), O2);
555 add(O2, O1, O1);
556
557 add(r1->after_save(), r2->after_save(), O2);
558 set((intptr_t)file, O3);
559 set(line, O4);
560 Label L;
561 // get nearby pc, store jmp target
562 call(L, relocInfo::none); // No relocation for call to pc+0x8
563 delayed()->st(O2, O1, 0);
564 bind(L);
565
566 // store nearby pc
567 st(O7, O1, sizeof(intptr_t));
568 // store file
569 st(O3, O1, 2*sizeof(intptr_t));
570 // store line
571 st(O4, O1, 3*sizeof(intptr_t));
572 add(O0, 1, O0);
573 and3(O0, JavaThread::jump_ring_buffer_size - 1, O0);
574 st(O0, G2_thread, in_bytes(JavaThread::jmp_ring_index_offset()));
575 restore();
576 #endif /* PRODUCT */
577 }
578 jmpl(r1, r2, G0);
579 }
580 void MacroAssembler::jmp(Register r1, int offset, const char* file, int line ) {
581 assert_not_delayed();
582 // This can only be traceable if r1 is visible after a window save
583 if (TraceJumps) {
584 #ifndef PRODUCT
585 save_frame(0);
586 verify_thread();
587 ld(G2_thread, in_bytes(JavaThread::jmp_ring_index_offset()), O0);
588 add(G2_thread, in_bytes(JavaThread::jmp_ring_offset()), O1);
589 sll(O0, exact_log2(4*sizeof(intptr_t)), O2);
590 add(O2, O1, O1);
591
592 add(r1->after_save(), offset, O2);
593 set((intptr_t)file, O3);
594 set(line, O4);
595 Label L;
596 // get nearby pc, store jmp target
597 call(L, relocInfo::none); // No relocation for call to pc+0x8
598 delayed()->st(O2, O1, 0);
599 bind(L);
600
601 // store nearby pc
602 st(O7, O1, sizeof(intptr_t));
603 // store file
604 st(O3, O1, 2*sizeof(intptr_t));
605 // store line
606 st(O4, O1, 3*sizeof(intptr_t));
607 add(O0, 1, O0);
608 and3(O0, JavaThread::jump_ring_buffer_size - 1, O0);
609 st(O0, G2_thread, in_bytes(JavaThread::jmp_ring_index_offset()));
610 restore();
611 #endif /* PRODUCT */
612 }
613 jmp(r1, offset);
614 }
615
616 // This code sequence is relocatable to any address, even on LP64.
617 void MacroAssembler::jumpl( Address& a, Register d, int offset, const char* file, int line ) {
618 assert_not_delayed();
619 // Force fixed length sethi because NativeJump and NativeFarCall don't handle
620 // variable length instruction streams.
621 sethi(a, /*ForceRelocatable=*/ true);
622 if (TraceJumps) {
623 #ifndef PRODUCT
624 // Must do the add here so relocation can find the remainder of the
625 // value to be relocated.
626 add(a.base(), a.disp() + offset, a.base(), a.rspec(offset));
627 save_frame(0);
628 verify_thread();
629 ld(G2_thread, in_bytes(JavaThread::jmp_ring_index_offset()), O0);
630 add(G2_thread, in_bytes(JavaThread::jmp_ring_offset()), O1);
631 sll(O0, exact_log2(4*sizeof(intptr_t)), O2);
632 add(O2, O1, O1);
633
634 set((intptr_t)file, O3);
635 set(line, O4);
636 Label L;
637
638 // get nearby pc, store jmp target
639 call(L, relocInfo::none); // No relocation for call to pc+0x8
640 delayed()->st(a.base()->after_save(), O1, 0);
641 bind(L);
642
643 // store nearby pc
644 st(O7, O1, sizeof(intptr_t));
645 // store file
646 st(O3, O1, 2*sizeof(intptr_t));
647 // store line
648 st(O4, O1, 3*sizeof(intptr_t));
649 add(O0, 1, O0);
650 and3(O0, JavaThread::jump_ring_buffer_size - 1, O0);
651 st(O0, G2_thread, in_bytes(JavaThread::jmp_ring_index_offset()));
652 restore();
653 jmpl(a.base(), G0, d);
654 #else
655 jmpl(a, d, offset);
656 #endif /* PRODUCT */
657 } else {
658 jmpl(a, d, offset);
659 }
660 }
661
662 void MacroAssembler::jump( Address& a, int offset, const char* file, int line ) {
663 jumpl( a, G0, offset, file, line );
664 }
665
666
667 // Convert to C varargs format
668 void MacroAssembler::set_varargs( Argument inArg, Register d ) {
669 // spill register-resident args to their memory slots
670 // (SPARC calling convention requires callers to have already preallocated these)
671 // Note that the inArg might in fact be an outgoing argument,
672 // if a leaf routine or stub does some tricky argument shuffling.
673 // This routine must work even though one of the saved arguments
674 // is in the d register (e.g., set_varargs(Argument(0, false), O0)).
675 for (Argument savePtr = inArg;
676 savePtr.is_register();
677 savePtr = savePtr.successor()) {
678 st_ptr(savePtr.as_register(), savePtr.address_in_frame());
679 }
680 // return the address of the first memory slot
681 add(inArg.address_in_frame(), d);
682 }
683
684 // Conditional breakpoint (for assertion checks in assembly code)
685 void MacroAssembler::breakpoint_trap(Condition c, CC cc) {
686 trap(c, cc, G0, ST_RESERVED_FOR_USER_0);
687 }
688
689 // We want to use ST_BREAKPOINT here, but the debugger is confused by it.
690 void MacroAssembler::breakpoint_trap() {
691 trap(ST_RESERVED_FOR_USER_0);
692 }
693
694 // flush windows (except current) using flushw instruction if avail.
695 void MacroAssembler::flush_windows() {
696 if (VM_Version::v9_instructions_work()) flushw();
697 else flush_windows_trap();
698 }
699
700 // Write serialization page so VM thread can do a pseudo remote membar
701 // We use the current thread pointer to calculate a thread specific
702 // offset to write to within the page. This minimizes bus traffic
703 // due to cache line collision.
704 void MacroAssembler::serialize_memory(Register thread, Register tmp1, Register tmp2) {
705 Address mem_serialize_page(tmp1, os::get_memory_serialize_page());
706 srl(thread, os::get_serialize_page_shift_count(), tmp2);
707 if (Assembler::is_simm13(os::vm_page_size())) {
708 and3(tmp2, (os::vm_page_size() - sizeof(int)), tmp2);
709 }
710 else {
711 set((os::vm_page_size() - sizeof(int)), tmp1);
712 and3(tmp2, tmp1, tmp2);
713 }
714 load_address(mem_serialize_page);
715 st(G0, tmp1, tmp2);
716 }
717
718
719
720 void MacroAssembler::enter() {
721 Unimplemented();
722 }
723
724 void MacroAssembler::leave() {
725 Unimplemented();
726 }
727
728 void MacroAssembler::mult(Register s1, Register s2, Register d) {
729 if(VM_Version::v9_instructions_work()) {
730 mulx (s1, s2, d);
731 } else {
732 smul (s1, s2, d);
733 }
734 }
735
736 void MacroAssembler::mult(Register s1, int simm13a, Register d) {
737 if(VM_Version::v9_instructions_work()) {
738 mulx (s1, simm13a, d);
739 } else {
740 smul (s1, simm13a, d);
741 }
742 }
743
744
745 #ifdef ASSERT
746 void MacroAssembler::read_ccr_v8_assert(Register ccr_save) {
747 const Register s1 = G3_scratch;
748 const Register s2 = G4_scratch;
749 Label get_psr_test;
750 // Get the condition codes the V8 way.
751 read_ccr_trap(s1);
752 mov(ccr_save, s2);
753 // This is a test of V8 which has icc but not xcc
754 // so mask off the xcc bits
755 and3(s2, 0xf, s2);
756 // Compare condition codes from the V8 and V9 ways.
757 subcc(s2, s1, G0);
758 br(Assembler::notEqual, true, Assembler::pt, get_psr_test);
759 delayed()->breakpoint_trap();
760 bind(get_psr_test);
761 }
762
763 void MacroAssembler::write_ccr_v8_assert(Register ccr_save) {
764 const Register s1 = G3_scratch;
765 const Register s2 = G4_scratch;
766 Label set_psr_test;
767 // Write out the saved condition codes the V8 way
768 write_ccr_trap(ccr_save, s1, s2);
769 // Read back the condition codes using the V9 instruction
770 rdccr(s1);
771 mov(ccr_save, s2);
772 // This is a test of V8 which has icc but not xcc
773 // so mask off the xcc bits
774 and3(s2, 0xf, s2);
775 and3(s1, 0xf, s1);
776 // Compare the V8 way with the V9 way.
777 subcc(s2, s1, G0);
778 br(Assembler::notEqual, true, Assembler::pt, set_psr_test);
779 delayed()->breakpoint_trap();
780 bind(set_psr_test);
781 }
782 #else
783 #define read_ccr_v8_assert(x)
784 #define write_ccr_v8_assert(x)
785 #endif // ASSERT
786
787 void MacroAssembler::read_ccr(Register ccr_save) {
788 if (VM_Version::v9_instructions_work()) {
789 rdccr(ccr_save);
790 // Test code sequence used on V8. Do not move above rdccr.
791 read_ccr_v8_assert(ccr_save);
792 } else {
793 read_ccr_trap(ccr_save);
794 }
795 }
796
797 void MacroAssembler::write_ccr(Register ccr_save) {
798 if (VM_Version::v9_instructions_work()) {
799 // Test code sequence used on V8. Do not move below wrccr.
800 write_ccr_v8_assert(ccr_save);
801 wrccr(ccr_save);
802 } else {
803 const Register temp_reg1 = G3_scratch;
804 const Register temp_reg2 = G4_scratch;
805 write_ccr_trap(ccr_save, temp_reg1, temp_reg2);
806 }
807 }
808
809
810 // Calls to C land
811
812 #ifdef ASSERT
813 // a hook for debugging
814 static Thread* reinitialize_thread() {
815 return ThreadLocalStorage::thread();
816 }
817 #else
818 #define reinitialize_thread ThreadLocalStorage::thread
819 #endif
820
821 #ifdef ASSERT
822 address last_get_thread = NULL;
823 #endif
824
825 // call this when G2_thread is not known to be valid
826 void MacroAssembler::get_thread() {
827 save_frame(0); // to avoid clobbering O0
828 mov(G1, L0); // avoid clobbering G1
829 mov(G5_method, L1); // avoid clobbering G5
830 mov(G3, L2); // avoid clobbering G3 also
831 mov(G4, L5); // avoid clobbering G4
832 #ifdef ASSERT
833 Address last_get_thread_addr(L3, (address)&last_get_thread);
834 sethi(last_get_thread_addr);
835 inc(L4, get_pc(L4) + 2 * BytesPerInstWord); // skip getpc() code + inc + st_ptr to point L4 at call
836 st_ptr(L4, last_get_thread_addr);
837 #endif
838 call(CAST_FROM_FN_PTR(address, reinitialize_thread), relocInfo::runtime_call_type);
839 delayed()->nop();
840 mov(L0, G1);
841 mov(L1, G5_method);
842 mov(L2, G3);
843 mov(L5, G4);
844 restore(O0, 0, G2_thread);
845 }
846
847 static Thread* verify_thread_subroutine(Thread* gthread_value) {
848 Thread* correct_value = ThreadLocalStorage::thread();
849 guarantee(gthread_value == correct_value, "G2_thread value must be the thread");
850 return correct_value;
851 }
852
853 void MacroAssembler::verify_thread() {
854 if (VerifyThread) {
855 // NOTE: this chops off the heads of the 64-bit O registers.
856 #ifdef CC_INTERP
857 save_frame(0);
858 #else
859 // make sure G2_thread contains the right value
860 save_frame_and_mov(0, Lmethod, Lmethod); // to avoid clobbering O0 (and propagate Lmethod for -Xprof)
861 mov(G1, L1); // avoid clobbering G1
862 // G2 saved below
863 mov(G3, L3); // avoid clobbering G3
864 mov(G4, L4); // avoid clobbering G4
865 mov(G5_method, L5); // avoid clobbering G5_method
866 #endif /* CC_INTERP */
867 #if defined(COMPILER2) && !defined(_LP64)
868 // Save & restore possible 64-bit Long arguments in G-regs
869 srlx(G1,32,L0);
870 srlx(G4,32,L6);
871 #endif
872 call(CAST_FROM_FN_PTR(address,verify_thread_subroutine), relocInfo::runtime_call_type);
873 delayed()->mov(G2_thread, O0);
874
875 mov(L1, G1); // Restore G1
876 // G2 restored below
877 mov(L3, G3); // restore G3
878 mov(L4, G4); // restore G4
879 mov(L5, G5_method); // restore G5_method
880 #if defined(COMPILER2) && !defined(_LP64)
881 // Save & restore possible 64-bit Long arguments in G-regs
882 sllx(L0,32,G2); // Move old high G1 bits high in G2
883 sllx(G1, 0,G1); // Clear current high G1 bits
884 or3 (G1,G2,G1); // Recover 64-bit G1
885 sllx(L6,32,G2); // Move old high G4 bits high in G2
886 sllx(G4, 0,G4); // Clear current high G4 bits
887 or3 (G4,G2,G4); // Recover 64-bit G4
888 #endif
889 restore(O0, 0, G2_thread);
890 }
891 }
892
893
894 void MacroAssembler::save_thread(const Register thread_cache) {
895 verify_thread();
896 if (thread_cache->is_valid()) {
897 assert(thread_cache->is_local() || thread_cache->is_in(), "bad volatile");
898 mov(G2_thread, thread_cache);
899 }
900 if (VerifyThread) {
901 // smash G2_thread, as if the VM were about to anyway
902 set(0x67676767, G2_thread);
903 }
904 }
905
906
907 void MacroAssembler::restore_thread(const Register thread_cache) {
908 if (thread_cache->is_valid()) {
909 assert(thread_cache->is_local() || thread_cache->is_in(), "bad volatile");
910 mov(thread_cache, G2_thread);
911 verify_thread();
912 } else {
913 // do it the slow way
914 get_thread();
915 }
916 }
917
918
919 // %%% maybe get rid of [re]set_last_Java_frame
920 void MacroAssembler::set_last_Java_frame(Register last_java_sp, Register last_Java_pc) {
921 assert_not_delayed();
922 Address flags(G2_thread,
923 0,
924 in_bytes(JavaThread::frame_anchor_offset()) +
925 in_bytes(JavaFrameAnchor::flags_offset()));
926 Address pc_addr(G2_thread,
927 0,
928 in_bytes(JavaThread::last_Java_pc_offset()));
929
930 // Always set last_Java_pc and flags first because once last_Java_sp is visible
931 // has_last_Java_frame is true and users will look at the rest of the fields.
932 // (Note: flags should always be zero before we get here so doesn't need to be set.)
933
934 #ifdef ASSERT
935 // Verify that flags was zeroed on return to Java
936 Label PcOk;
937 save_frame(0); // to avoid clobbering O0
938 ld_ptr(pc_addr, L0);
939 tst(L0);
940 #ifdef _LP64
941 brx(Assembler::zero, false, Assembler::pt, PcOk);
942 #else
943 br(Assembler::zero, false, Assembler::pt, PcOk);
944 #endif // _LP64
945 delayed() -> nop();
946 stop("last_Java_pc not zeroed before leaving Java");
947 bind(PcOk);
948
949 // Verify that flags was zeroed on return to Java
950 Label FlagsOk;
951 ld(flags, L0);
952 tst(L0);
953 br(Assembler::zero, false, Assembler::pt, FlagsOk);
954 delayed() -> restore();
955 stop("flags not zeroed before leaving Java");
956 bind(FlagsOk);
957 #endif /* ASSERT */
958 //
959 // When returning from calling out from Java mode the frame anchor's last_Java_pc
960 // will always be set to NULL. It is set here so that if we are doing a call to
961 // native (not VM) that we capture the known pc and don't have to rely on the
962 // native call having a standard frame linkage where we can find the pc.
963
964 if (last_Java_pc->is_valid()) {
965 st_ptr(last_Java_pc, pc_addr);
966 }
967
968 #ifdef _LP64
969 #ifdef ASSERT
970 // Make sure that we have an odd stack
971 Label StackOk;
972 andcc(last_java_sp, 0x01, G0);
973 br(Assembler::notZero, false, Assembler::pt, StackOk);
974 delayed() -> nop();
975 stop("Stack Not Biased in set_last_Java_frame");
976 bind(StackOk);
977 #endif // ASSERT
978 assert( last_java_sp != G4_scratch, "bad register usage in set_last_Java_frame");
979 add( last_java_sp, STACK_BIAS, G4_scratch );
980 st_ptr(G4_scratch, Address(G2_thread, 0, in_bytes(JavaThread::last_Java_sp_offset())));
981 #else
982 st_ptr(last_java_sp, Address(G2_thread, 0, in_bytes(JavaThread::last_Java_sp_offset())));
983 #endif // _LP64
984 }
985
986 void MacroAssembler::reset_last_Java_frame(void) {
987 assert_not_delayed();
988
989 Address sp_addr(G2_thread, 0, in_bytes(JavaThread::last_Java_sp_offset()));
990 Address pc_addr(G2_thread,
991 0,
992 in_bytes(JavaThread::frame_anchor_offset()) + in_bytes(JavaFrameAnchor::last_Java_pc_offset()));
993 Address flags(G2_thread,
994 0,
995 in_bytes(JavaThread::frame_anchor_offset()) + in_bytes(JavaFrameAnchor::flags_offset()));
996
997 #ifdef ASSERT
998 // check that it WAS previously set
999 #ifdef CC_INTERP
1000 save_frame(0);
1001 #else
1002 save_frame_and_mov(0, Lmethod, Lmethod); // Propagate Lmethod to helper frame for -Xprof
1003 #endif /* CC_INTERP */
1004 ld_ptr(sp_addr, L0);
1005 tst(L0);
1006 breakpoint_trap(Assembler::zero, Assembler::ptr_cc);
1007 restore();
1008 #endif // ASSERT
1009
1010 st_ptr(G0, sp_addr);
1011 // Always return last_Java_pc to zero
1012 st_ptr(G0, pc_addr);
1013 // Always null flags after return to Java
1014 st(G0, flags);
1015 }
1016
1017
1018 void MacroAssembler::call_VM_base(
1019 Register oop_result,
1020 Register thread_cache,
1021 Register last_java_sp,
1022 address entry_point,
1023 int number_of_arguments,
1024 bool check_exceptions)
1025 {
1026 assert_not_delayed();
1027
1028 // determine last_java_sp register
1029 if (!last_java_sp->is_valid()) {
1030 last_java_sp = SP;
1031 }
1032 // debugging support
1033 assert(number_of_arguments >= 0 , "cannot have negative number of arguments");
1034
1035 // 64-bit last_java_sp is biased!
1036 set_last_Java_frame(last_java_sp, noreg);
1037 if (VerifyThread) mov(G2_thread, O0); // about to be smashed; pass early
1038 save_thread(thread_cache);
1039 // do the call
1040 call(entry_point, relocInfo::runtime_call_type);
1041 if (!VerifyThread)
1042 delayed()->mov(G2_thread, O0); // pass thread as first argument
1043 else
1044 delayed()->nop(); // (thread already passed)
1045 restore_thread(thread_cache);
1046 reset_last_Java_frame();
1047
1048 // check for pending exceptions. use Gtemp as scratch register.
1049 if (check_exceptions) {
1050 check_and_forward_exception(Gtemp);
1051 }
1052
1053 // get oop result if there is one and reset the value in the thread
1054 if (oop_result->is_valid()) {
1055 get_vm_result(oop_result);
1056 }
1057 }
1058
1059 void MacroAssembler::check_and_forward_exception(Register scratch_reg)
1060 {
1061 Label L;
1062
1063 check_and_handle_popframe(scratch_reg);
1064 check_and_handle_earlyret(scratch_reg);
1065
1066 Address exception_addr(G2_thread, 0, in_bytes(Thread::pending_exception_offset()));
1067 ld_ptr(exception_addr, scratch_reg);
1068 br_null(scratch_reg,false,pt,L);
1069 delayed()->nop();
1070 // we use O7 linkage so that forward_exception_entry has the issuing PC
1071 call(StubRoutines::forward_exception_entry(), relocInfo::runtime_call_type);
1072 delayed()->nop();
1073 bind(L);
1074 }
1075
1076
1077 void MacroAssembler::check_and_handle_popframe(Register scratch_reg) {
1078 }
1079
1080
1081 void MacroAssembler::check_and_handle_earlyret(Register scratch_reg) {
1082 }
1083
1084
1085 void MacroAssembler::call_VM(Register oop_result, address entry_point, int number_of_arguments, bool check_exceptions) {
1086 call_VM_base(oop_result, noreg, noreg, entry_point, number_of_arguments, check_exceptions);
1087 }
1088
1089
1090 void MacroAssembler::call_VM(Register oop_result, address entry_point, Register arg_1, bool check_exceptions) {
1091 // O0 is reserved for the thread
1092 mov(arg_1, O1);
1093 call_VM(oop_result, entry_point, 1, check_exceptions);
1094 }
1095
1096
1097 void MacroAssembler::call_VM(Register oop_result, address entry_point, Register arg_1, Register arg_2, bool check_exceptions) {
1098 // O0 is reserved for the thread
1099 mov(arg_1, O1);
1100 mov(arg_2, O2); assert(arg_2 != O1, "smashed argument");
1101 call_VM(oop_result, entry_point, 2, check_exceptions);
1102 }
1103
1104
1105 void MacroAssembler::call_VM(Register oop_result, address entry_point, Register arg_1, Register arg_2, Register arg_3, bool check_exceptions) {
1106 // O0 is reserved for the thread
1107 mov(arg_1, O1);
1108 mov(arg_2, O2); assert(arg_2 != O1, "smashed argument");
1109 mov(arg_3, O3); assert(arg_3 != O1 && arg_3 != O2, "smashed argument");
1110 call_VM(oop_result, entry_point, 3, check_exceptions);
1111 }
1112
1113
1114
1115 // Note: The following call_VM overloadings are useful when a "save"
1116 // has already been performed by a stub, and the last Java frame is
1117 // the previous one. In that case, last_java_sp must be passed as FP
1118 // instead of SP.
1119
1120
1121 void MacroAssembler::call_VM(Register oop_result, Register last_java_sp, address entry_point, int number_of_arguments, bool check_exceptions) {
1122 call_VM_base(oop_result, noreg, last_java_sp, entry_point, number_of_arguments, check_exceptions);
1123 }
1124
1125
1126 void MacroAssembler::call_VM(Register oop_result, Register last_java_sp, address entry_point, Register arg_1, bool check_exceptions) {
1127 // O0 is reserved for the thread
1128 mov(arg_1, O1);
1129 call_VM(oop_result, last_java_sp, entry_point, 1, check_exceptions);
1130 }
1131
1132
1133 void MacroAssembler::call_VM(Register oop_result, Register last_java_sp, address entry_point, Register arg_1, Register arg_2, bool check_exceptions) {
1134 // O0 is reserved for the thread
1135 mov(arg_1, O1);
1136 mov(arg_2, O2); assert(arg_2 != O1, "smashed argument");
1137 call_VM(oop_result, last_java_sp, entry_point, 2, check_exceptions);
1138 }
1139
1140
1141 void MacroAssembler::call_VM(Register oop_result, Register last_java_sp, address entry_point, Register arg_1, Register arg_2, Register arg_3, bool check_exceptions) {
1142 // O0 is reserved for the thread
1143 mov(arg_1, O1);
1144 mov(arg_2, O2); assert(arg_2 != O1, "smashed argument");
1145 mov(arg_3, O3); assert(arg_3 != O1 && arg_3 != O2, "smashed argument");
1146 call_VM(oop_result, last_java_sp, entry_point, 3, check_exceptions);
1147 }
1148
1149
1150
1151 void MacroAssembler::call_VM_leaf_base(Register thread_cache, address entry_point, int number_of_arguments) {
1152 assert_not_delayed();
1153 save_thread(thread_cache);
1154 // do the call
1155 call(entry_point, relocInfo::runtime_call_type);
1156 delayed()->nop();
1157 restore_thread(thread_cache);
1158 }
1159
1160
1161 void MacroAssembler::call_VM_leaf(Register thread_cache, address entry_point, int number_of_arguments) {
1162 call_VM_leaf_base(thread_cache, entry_point, number_of_arguments);
1163 }
1164
1165
1166 void MacroAssembler::call_VM_leaf(Register thread_cache, address entry_point, Register arg_1) {
1167 mov(arg_1, O0);
1168 call_VM_leaf(thread_cache, entry_point, 1);
1169 }
1170
1171
1172 void MacroAssembler::call_VM_leaf(Register thread_cache, address entry_point, Register arg_1, Register arg_2) {
1173 mov(arg_1, O0);
1174 mov(arg_2, O1); assert(arg_2 != O0, "smashed argument");
1175 call_VM_leaf(thread_cache, entry_point, 2);
1176 }
1177
1178
1179 void MacroAssembler::call_VM_leaf(Register thread_cache, address entry_point, Register arg_1, Register arg_2, Register arg_3) {
1180 mov(arg_1, O0);
1181 mov(arg_2, O1); assert(arg_2 != O0, "smashed argument");
1182 mov(arg_3, O2); assert(arg_3 != O0 && arg_3 != O1, "smashed argument");
1183 call_VM_leaf(thread_cache, entry_point, 3);
1184 }
1185
1186
1187 void MacroAssembler::get_vm_result(Register oop_result) {
1188 verify_thread();
1189 Address vm_result_addr(G2_thread, 0, in_bytes(JavaThread::vm_result_offset()));
1190 ld_ptr( vm_result_addr, oop_result);
1191 st_ptr(G0, vm_result_addr);
1192 verify_oop(oop_result);
1193 }
1194
1195
1196 void MacroAssembler::get_vm_result_2(Register oop_result) {
1197 verify_thread();
1198 Address vm_result_addr_2(G2_thread, 0, in_bytes(JavaThread::vm_result_2_offset()));
1199 ld_ptr(vm_result_addr_2, oop_result);
1200 st_ptr(G0, vm_result_addr_2);
1201 verify_oop(oop_result);
1202 }
1203
1204
1205 // We require that C code which does not return a value in vm_result will
1206 // leave it undisturbed.
1207 void MacroAssembler::set_vm_result(Register oop_result) {
1208 verify_thread();
1209 Address vm_result_addr(G2_thread, 0, in_bytes(JavaThread::vm_result_offset()));
1210 verify_oop(oop_result);
1211
1212 # ifdef ASSERT
1213 // Check that we are not overwriting any other oop.
1214 #ifdef CC_INTERP
1215 save_frame(0);
1216 #else
1217 save_frame_and_mov(0, Lmethod, Lmethod); // Propagate Lmethod for -Xprof
1218 #endif /* CC_INTERP */
1219 ld_ptr(vm_result_addr, L0);
1220 tst(L0);
1221 restore();
1222 breakpoint_trap(notZero, Assembler::ptr_cc);
1223 // }
1224 # endif
1225
1226 st_ptr(oop_result, vm_result_addr);
1227 }
1228
1229
1230 void MacroAssembler::card_table_write(jbyte* byte_map_base,
1231 Register tmp, Register obj) {
1232 #ifdef _LP64
1233 srlx(obj, CardTableModRefBS::card_shift, obj);
1234 #else
1235 srl(obj, CardTableModRefBS::card_shift, obj);
1236 #endif
1237 assert( tmp != obj, "need separate temp reg");
1238 Address rs(tmp, (address)byte_map_base);
1239 load_address(rs);
1240 stb(G0, rs.base(), obj);
1241 }
1242
1243 // %%% Note: The following six instructions have been moved,
1244 // unchanged, from assembler_sparc.inline.hpp.
1245 // They will be refactored at a later date.
1246
1247 void MacroAssembler::sethi(intptr_t imm22a,
1248 Register d,
1249 bool ForceRelocatable,
1250 RelocationHolder const& rspec) {
1251 Address adr( d, (address)imm22a, rspec );
1252 MacroAssembler::sethi( adr, ForceRelocatable );
1253 }
1254
1255
1256 void MacroAssembler::sethi(Address& a, bool ForceRelocatable) {
1257 address save_pc;
1258 int shiftcnt;
1259 // if addr of local, do not need to load it
1260 assert(a.base() != FP && a.base() != SP, "just use ld or st for locals");
1261 #ifdef _LP64
1262 # ifdef CHECK_DELAY
1263 assert_not_delayed( (char *)"cannot put two instructions in delay slot" );
1264 # endif
1265 v9_dep();
1266 // ForceRelocatable = 1;
1267 save_pc = pc();
1268 if (a.hi32() == 0 && a.low32() >= 0) {
1269 Assembler::sethi(a.low32(), a.base(), a.rspec());
1270 }
1271 else if (a.hi32() == -1) {
1272 Assembler::sethi(~a.low32(), a.base(), a.rspec());
1273 xor3(a.base(), ~low10(~0), a.base());
1274 }
1275 else {
1276 Assembler::sethi(a.hi32(), a.base(), a.rspec() ); // 22
1277 if ( a.hi32() & 0x3ff ) // Any bits?
1278 or3( a.base(), a.hi32() & 0x3ff ,a.base() ); // High 32 bits are now in low 32
1279 if ( a.low32() & 0xFFFFFC00 ) { // done?
1280 if( (a.low32() >> 20) & 0xfff ) { // Any bits set?
1281 sllx(a.base(), 12, a.base()); // Make room for next 12 bits
1282 or3( a.base(), (a.low32() >> 20) & 0xfff,a.base() ); // Or in next 12
1283 shiftcnt = 0; // We already shifted
1284 }
1285 else
1286 shiftcnt = 12;
1287 if( (a.low32() >> 10) & 0x3ff ) {
1288 sllx(a.base(), shiftcnt+10, a.base());// Make room for last 10 bits
1289 or3( a.base(), (a.low32() >> 10) & 0x3ff,a.base() ); // Or in next 10
1290 shiftcnt = 0;
1291 }
1292 else
1293 shiftcnt = 10;
1294 sllx(a.base(), shiftcnt+10 , a.base()); // Shift leaving disp field 0'd
1295 }
1296 else
1297 sllx( a.base(), 32, a.base() );
1298 }
1299 // Pad out the instruction sequence so it can be
1300 // patched later.
1301 if ( ForceRelocatable || (a.rtype() != relocInfo::none &&
1302 a.rtype() != relocInfo::runtime_call_type) ) {
1303 while ( pc() < (save_pc + (7 * BytesPerInstWord )) )
1304 nop();
1305 }
1306 #else
1307 Assembler::sethi(a.hi(), a.base(), a.rspec());
1308 #endif
1309
1310 }
1311
1312 int MacroAssembler::size_of_sethi(address a, bool worst_case) {
1313 #ifdef _LP64
1314 if (worst_case) return 7;
1315 intptr_t iaddr = (intptr_t)a;
1316 int hi32 = (int)(iaddr >> 32);
1317 int lo32 = (int)(iaddr);
1318 int inst_count;
1319 if (hi32 == 0 && lo32 >= 0)
1320 inst_count = 1;
1321 else if (hi32 == -1)
1322 inst_count = 2;
1323 else {
1324 inst_count = 2;
1325 if ( hi32 & 0x3ff )
1326 inst_count++;
1327 if ( lo32 & 0xFFFFFC00 ) {
1328 if( (lo32 >> 20) & 0xfff ) inst_count += 2;
1329 if( (lo32 >> 10) & 0x3ff ) inst_count += 2;
1330 }
1331 }
1332 return BytesPerInstWord * inst_count;
1333 #else
1334 return BytesPerInstWord;
1335 #endif
1336 }
1337
1338 int MacroAssembler::worst_case_size_of_set() {
1339 return size_of_sethi(NULL, true) + 1;
1340 }
1341
1342 void MacroAssembler::set(intptr_t value, Register d,
1343 RelocationHolder const& rspec) {
1344 Address val( d, (address)value, rspec);
1345
1346 if ( rspec.type() == relocInfo::none ) {
1347 // can optimize
1348 if (-4096 <= value && value <= 4095) {
1349 or3(G0, value, d); // setsw (this leaves upper 32 bits sign-extended)
1350 return;
1351 }
1352 if (inv_hi22(hi22(value)) == value) {
1353 sethi(val);
1354 return;
1355 }
1356 }
1357 assert_not_delayed( (char *)"cannot put two instructions in delay slot" );
1358 sethi( val );
1359 if (rspec.type() != relocInfo::none || (value & 0x3ff) != 0) {
1360 add( d, value & 0x3ff, d, rspec);
1361 }
1362 }
1363
1364 void MacroAssembler::setsw(int value, Register d,
1365 RelocationHolder const& rspec) {
1366 Address val( d, (address)value, rspec);
1367 if ( rspec.type() == relocInfo::none ) {
1368 // can optimize
1369 if (-4096 <= value && value <= 4095) {
1370 or3(G0, value, d);
1371 return;
1372 }
1373 if (inv_hi22(hi22(value)) == value) {
1374 sethi( val );
1375 #ifndef _LP64
1376 if ( value < 0 ) {
1377 assert_not_delayed();
1378 sra (d, G0, d);
1379 }
1380 #endif
1381 return;
1382 }
1383 }
1384 assert_not_delayed();
1385 sethi( val );
1386 add( d, value & 0x3ff, d, rspec);
1387
1388 // (A negative value could be loaded in 2 insns with sethi/xor,
1389 // but it would take a more complex relocation.)
1390 #ifndef _LP64
1391 if ( value < 0)
1392 sra(d, G0, d);
1393 #endif
1394 }
1395
1396 // %%% End of moved six set instructions.
1397
1398
1399 void MacroAssembler::set64(jlong value, Register d, Register tmp) {
1400 assert_not_delayed();
1401 v9_dep();
1402
1403 int hi = (int)(value >> 32);
1404 int lo = (int)(value & ~0);
1405 // (Matcher::isSimpleConstant64 knows about the following optimizations.)
1406 if (Assembler::is_simm13(lo) && value == lo) {
1407 or3(G0, lo, d);
1408 } else if (hi == 0) {
1409 Assembler::sethi(lo, d); // hardware version zero-extends to upper 32
1410 if (low10(lo) != 0)
1411 or3(d, low10(lo), d);
1412 }
1413 else if (hi == -1) {
1414 Assembler::sethi(~lo, d); // hardware version zero-extends to upper 32
1415 xor3(d, low10(lo) ^ ~low10(~0), d);
1416 }
1417 else if (lo == 0) {
1418 if (Assembler::is_simm13(hi)) {
1419 or3(G0, hi, d);
1420 } else {
1421 Assembler::sethi(hi, d); // hardware version zero-extends to upper 32
1422 if (low10(hi) != 0)
1423 or3(d, low10(hi), d);
1424 }
1425 sllx(d, 32, d);
1426 }
1427 else {
1428 Assembler::sethi(hi, tmp);
1429 Assembler::sethi(lo, d); // macro assembler version sign-extends
1430 if (low10(hi) != 0)
1431 or3 (tmp, low10(hi), tmp);
1432 if (low10(lo) != 0)
1433 or3 ( d, low10(lo), d);
1434 sllx(tmp, 32, tmp);
1435 or3 (d, tmp, d);
1436 }
1437 }
1438
1439 // compute size in bytes of sparc frame, given
1440 // number of extraWords
1441 int MacroAssembler::total_frame_size_in_bytes(int extraWords) {
1442
1443 int nWords = frame::memory_parameter_word_sp_offset;
1444
1445 nWords += extraWords;
1446
1447 if (nWords & 1) ++nWords; // round up to double-word
1448
1449 return nWords * BytesPerWord;
1450 }
1451
1452
1453 // save_frame: given number of "extra" words in frame,
1454 // issue approp. save instruction (p 200, v8 manual)
1455
1456 void MacroAssembler::save_frame(int extraWords = 0) {
1457 int delta = -total_frame_size_in_bytes(extraWords);
1458 if (is_simm13(delta)) {
1459 save(SP, delta, SP);
1460 } else {
1461 set(delta, G3_scratch);
1462 save(SP, G3_scratch, SP);
1463 }
1464 }
1465
1466
1467 void MacroAssembler::save_frame_c1(int size_in_bytes) {
1468 if (is_simm13(-size_in_bytes)) {
1469 save(SP, -size_in_bytes, SP);
1470 } else {
1471 set(-size_in_bytes, G3_scratch);
1472 save(SP, G3_scratch, SP);
1473 }
1474 }
1475
1476
1477 void MacroAssembler::save_frame_and_mov(int extraWords,
1478 Register s1, Register d1,
1479 Register s2, Register d2) {
1480 assert_not_delayed();
1481
1482 // The trick here is to use precisely the same memory word
1483 // that trap handlers also use to save the register.
1484 // This word cannot be used for any other purpose, but
1485 // it works fine to save the register's value, whether or not
1486 // an interrupt flushes register windows at any given moment!
1487 Address s1_addr;
1488 if (s1->is_valid() && (s1->is_in() || s1->is_local())) {
1489 s1_addr = s1->address_in_saved_window();
1490 st_ptr(s1, s1_addr);
1491 }
1492
1493 Address s2_addr;
1494 if (s2->is_valid() && (s2->is_in() || s2->is_local())) {
1495 s2_addr = s2->address_in_saved_window();
1496 st_ptr(s2, s2_addr);
1497 }
1498
1499 save_frame(extraWords);
1500
1501 if (s1_addr.base() == SP) {
1502 ld_ptr(s1_addr.after_save(), d1);
1503 } else if (s1->is_valid()) {
1504 mov(s1->after_save(), d1);
1505 }
1506
1507 if (s2_addr.base() == SP) {
1508 ld_ptr(s2_addr.after_save(), d2);
1509 } else if (s2->is_valid()) {
1510 mov(s2->after_save(), d2);
1511 }
1512 }
1513
1514
1515 Address MacroAssembler::allocate_oop_address(jobject obj, Register d) {
1516 assert(oop_recorder() != NULL, "this assembler needs an OopRecorder");
1517 int oop_index = oop_recorder()->allocate_index(obj);
1518 return Address(d, address(obj), oop_Relocation::spec(oop_index));
1519 }
1520
1521
1522 Address MacroAssembler::constant_oop_address(jobject obj, Register d) {
1523 assert(oop_recorder() != NULL, "this assembler needs an OopRecorder");
1524 int oop_index = oop_recorder()->find_index(obj);
1525 return Address(d, address(obj), oop_Relocation::spec(oop_index));
1526 }
1527
1528 void MacroAssembler::set_narrow_oop(jobject obj, Register d) {
1529 assert(oop_recorder() != NULL, "this assembler needs an OopRecorder");
1530 int oop_index = oop_recorder()->find_index(obj);
1531 RelocationHolder rspec = oop_Relocation::spec(oop_index);
1532
1533 assert_not_delayed();
1534 // Relocation with special format (see relocInfo_sparc.hpp).
1535 relocate(rspec, 1);
1536 // Assembler::sethi(0x3fffff, d);
1537 emit_long( op(branch_op) | rd(d) | op2(sethi_op2) | hi22(0x3fffff) );
1538 // Don't add relocation for 'add'. Do patching during 'sethi' processing.
1539 add(d, 0x3ff, d);
1540
1541 }
1542
1543
1544 void MacroAssembler::align(int modulus) {
1545 while (offset() % modulus != 0) nop();
1546 }
1547
1548
1549 void MacroAssembler::safepoint() {
1550 relocate(breakpoint_Relocation::spec(breakpoint_Relocation::safepoint));
1551 }
1552
1553
1554 void RegistersForDebugging::print(outputStream* s) {
1555 int j;
1556 for ( j = 0; j < 8; ++j )
1557 if ( j != 6 ) s->print_cr("i%d = 0x%.16lx", j, i[j]);
1558 else s->print_cr( "fp = 0x%.16lx", i[j]);
1559 s->cr();
1560
1561 for ( j = 0; j < 8; ++j )
1562 s->print_cr("l%d = 0x%.16lx", j, l[j]);
1563 s->cr();
1564
1565 for ( j = 0; j < 8; ++j )
1566 if ( j != 6 ) s->print_cr("o%d = 0x%.16lx", j, o[j]);
1567 else s->print_cr( "sp = 0x%.16lx", o[j]);
1568 s->cr();
1569
1570 for ( j = 0; j < 8; ++j )
1571 s->print_cr("g%d = 0x%.16lx", j, g[j]);
1572 s->cr();
1573
1574 // print out floats with compression
1575 for (j = 0; j < 32; ) {
1576 jfloat val = f[j];
1577 int last = j;
1578 for ( ; last+1 < 32; ++last ) {
1579 char b1[1024], b2[1024];
1580 sprintf(b1, "%f", val);
1581 sprintf(b2, "%f", f[last+1]);
1582 if (strcmp(b1, b2))
1583 break;
1584 }
1585 s->print("f%d", j);
1586 if ( j != last ) s->print(" - f%d", last);
1587 s->print(" = %f", val);
1588 s->fill_to(25);
1589 s->print_cr(" (0x%x)", val);
1590 j = last + 1;
1591 }
1592 s->cr();
1593
1594 // and doubles (evens only)
1595 for (j = 0; j < 32; ) {
1596 jdouble val = d[j];
1597 int last = j;
1598 for ( ; last+1 < 32; ++last ) {
1599 char b1[1024], b2[1024];
1600 sprintf(b1, "%f", val);
1601 sprintf(b2, "%f", d[last+1]);
1602 if (strcmp(b1, b2))
1603 break;
1604 }
1605 s->print("d%d", 2 * j);
1606 if ( j != last ) s->print(" - d%d", last);
1607 s->print(" = %f", val);
1608 s->fill_to(30);
1609 s->print("(0x%x)", *(int*)&val);
1610 s->fill_to(42);
1611 s->print_cr("(0x%x)", *(1 + (int*)&val));
1612 j = last + 1;
1613 }
1614 s->cr();
1615 }
1616
1617 void RegistersForDebugging::save_registers(MacroAssembler* a) {
1618 a->sub(FP, round_to(sizeof(RegistersForDebugging), sizeof(jdouble)) - STACK_BIAS, O0);
1619 a->flush_windows();
1620 int i;
1621 for (i = 0; i < 8; ++i) {
1622 a->ld_ptr(as_iRegister(i)->address_in_saved_window().after_save(), L1); a->st_ptr( L1, O0, i_offset(i));
1623 a->ld_ptr(as_lRegister(i)->address_in_saved_window().after_save(), L1); a->st_ptr( L1, O0, l_offset(i));
1624 a->st_ptr(as_oRegister(i)->after_save(), O0, o_offset(i));
1625 a->st_ptr(as_gRegister(i)->after_save(), O0, g_offset(i));
1626 }
1627 for (i = 0; i < 32; ++i) {
1628 a->stf(FloatRegisterImpl::S, as_FloatRegister(i), O0, f_offset(i));
1629 }
1630 for (i = 0; i < (VM_Version::v9_instructions_work() ? 64 : 32); i += 2) {
1631 a->stf(FloatRegisterImpl::D, as_FloatRegister(i), O0, d_offset(i));
1632 }
1633 }
1634
1635 void RegistersForDebugging::restore_registers(MacroAssembler* a, Register r) {
1636 for (int i = 1; i < 8; ++i) {
1637 a->ld_ptr(r, g_offset(i), as_gRegister(i));
1638 }
1639 for (int j = 0; j < 32; ++j) {
1640 a->ldf(FloatRegisterImpl::S, O0, f_offset(j), as_FloatRegister(j));
1641 }
1642 for (int k = 0; k < (VM_Version::v9_instructions_work() ? 64 : 32); k += 2) {
1643 a->ldf(FloatRegisterImpl::D, O0, d_offset(k), as_FloatRegister(k));
1644 }
1645 }
1646
1647
1648 // pushes double TOS element of FPU stack on CPU stack; pops from FPU stack
1649 void MacroAssembler::push_fTOS() {
1650 // %%%%%% need to implement this
1651 }
1652
1653 // pops double TOS element from CPU stack and pushes on FPU stack
1654 void MacroAssembler::pop_fTOS() {
1655 // %%%%%% need to implement this
1656 }
1657
1658 void MacroAssembler::empty_FPU_stack() {
1659 // %%%%%% need to implement this
1660 }
1661
1662 void MacroAssembler::_verify_oop(Register reg, const char* msg, const char * file, int line) {
1663 // plausibility check for oops
1664 if (!VerifyOops) return;
1665
1666 if (reg == G0) return; // always NULL, which is always an oop
1667
1668 char buffer[64];
1669 #ifdef COMPILER1
1670 if (CommentedAssembly) {
1671 snprintf(buffer, sizeof(buffer), "verify_oop at %d", offset());
1672 block_comment(buffer);
1673 }
1674 #endif
1675
1676 int len = strlen(file) + strlen(msg) + 1 + 4;
1677 sprintf(buffer, "%d", line);
1678 len += strlen(buffer);
1679 sprintf(buffer, " at offset %d ", offset());
1680 len += strlen(buffer);
1681 char * real_msg = new char[len];
1682 sprintf(real_msg, "%s%s(%s:%d)", msg, buffer, file, line);
1683
1684 // Call indirectly to solve generation ordering problem
1685 Address a(O7, (address)StubRoutines::verify_oop_subroutine_entry_address());
1686
1687 // Make some space on stack above the current register window.
1688 // Enough to hold 8 64-bit registers.
1689 add(SP,-8*8,SP);
1690
1691 // Save some 64-bit registers; a normal 'save' chops the heads off
1692 // of 64-bit longs in the 32-bit build.
1693 stx(O0,SP,frame::register_save_words*wordSize+STACK_BIAS+0*8);
1694 stx(O1,SP,frame::register_save_words*wordSize+STACK_BIAS+1*8);
1695 mov(reg,O0); // Move arg into O0; arg might be in O7 which is about to be crushed
1696 stx(O7,SP,frame::register_save_words*wordSize+STACK_BIAS+7*8);
1697
1698 set((intptr_t)real_msg, O1);
1699 // Load address to call to into O7
1700 load_ptr_contents(a, O7);
1701 // Register call to verify_oop_subroutine
1702 callr(O7, G0);
1703 delayed()->nop();
1704 // recover frame size
1705 add(SP, 8*8,SP);
1706 }
1707
1708 void MacroAssembler::_verify_oop_addr(Address addr, const char* msg, const char * file, int line) {
1709 // plausibility check for oops
1710 if (!VerifyOops) return;
1711
1712 char buffer[64];
1713 sprintf(buffer, "%d", line);
1714 int len = strlen(file) + strlen(msg) + 1 + 4 + strlen(buffer);
1715 sprintf(buffer, " at SP+%d ", addr.disp());
1716 len += strlen(buffer);
1717 char * real_msg = new char[len];
1718 sprintf(real_msg, "%s at SP+%d (%s:%d)", msg, addr.disp(), file, line);
1719
1720 // Call indirectly to solve generation ordering problem
1721 Address a(O7, (address)StubRoutines::verify_oop_subroutine_entry_address());
1722
1723 // Make some space on stack above the current register window.
1724 // Enough to hold 8 64-bit registers.
1725 add(SP,-8*8,SP);
1726
1727 // Save some 64-bit registers; a normal 'save' chops the heads off
1728 // of 64-bit longs in the 32-bit build.
1729 stx(O0,SP,frame::register_save_words*wordSize+STACK_BIAS+0*8);
1730 stx(O1,SP,frame::register_save_words*wordSize+STACK_BIAS+1*8);
1731 ld_ptr(addr.base(), addr.disp() + 8*8, O0); // Load arg into O0; arg might be in O7 which is about to be crushed
1732 stx(O7,SP,frame::register_save_words*wordSize+STACK_BIAS+7*8);
1733
1734 set((intptr_t)real_msg, O1);
1735 // Load address to call to into O7
1736 load_ptr_contents(a, O7);
1737 // Register call to verify_oop_subroutine
1738 callr(O7, G0);
1739 delayed()->nop();
1740 // recover frame size
1741 add(SP, 8*8,SP);
1742 }
1743
1744 // side-door communication with signalHandler in os_solaris.cpp
1745 address MacroAssembler::_verify_oop_implicit_branch[3] = { NULL };
1746
1747 // This macro is expanded just once; it creates shared code. Contract:
1748 // receives an oop in O0. Must restore O0 & O7 from TLS. Must not smash ANY
1749 // registers, including flags. May not use a register 'save', as this blows
1750 // the high bits of the O-regs if they contain Long values. Acts as a 'leaf'
1751 // call.
1752 void MacroAssembler::verify_oop_subroutine() {
1753 assert( VM_Version::v9_instructions_work(), "VerifyOops not supported for V8" );
1754
1755 // Leaf call; no frame.
1756 Label succeed, fail, null_or_fail;
1757
1758 // O0 and O7 were saved already (O0 in O0's TLS home, O7 in O5's TLS home).
1759 // O0 is now the oop to be checked. O7 is the return address.
1760 Register O0_obj = O0;
1761
1762 // Save some more registers for temps.
1763 stx(O2,SP,frame::register_save_words*wordSize+STACK_BIAS+2*8);
1764 stx(O3,SP,frame::register_save_words*wordSize+STACK_BIAS+3*8);
1765 stx(O4,SP,frame::register_save_words*wordSize+STACK_BIAS+4*8);
1766 stx(O5,SP,frame::register_save_words*wordSize+STACK_BIAS+5*8);
1767
1768 // Save flags
1769 Register O5_save_flags = O5;
1770 rdccr( O5_save_flags );
1771
1772 { // count number of verifies
1773 Register O2_adr = O2;
1774 Register O3_accum = O3;
1775 Address count_addr( O2_adr, (address) StubRoutines::verify_oop_count_addr() );
1776 sethi(count_addr);
1777 ld(count_addr, O3_accum);
1778 inc(O3_accum);
1779 st(O3_accum, count_addr);
1780 }
1781
1782 Register O2_mask = O2;
1783 Register O3_bits = O3;
1784 Register O4_temp = O4;
1785
1786 // mark lower end of faulting range
1787 assert(_verify_oop_implicit_branch[0] == NULL, "set once");
1788 _verify_oop_implicit_branch[0] = pc();
1789
1790 // We can't check the mark oop because it could be in the process of
1791 // locking or unlocking while this is running.
1792 set(Universe::verify_oop_mask (), O2_mask);
1793 set(Universe::verify_oop_bits (), O3_bits);
1794
1795 // assert((obj & oop_mask) == oop_bits);
1796 and3(O0_obj, O2_mask, O4_temp);
1797 cmp(O4_temp, O3_bits);
1798 brx(notEqual, false, pn, null_or_fail);
1799 delayed()->nop();
1800
1801 if ((NULL_WORD & Universe::verify_oop_mask()) == Universe::verify_oop_bits()) {
1802 // the null_or_fail case is useless; must test for null separately
1803 br_null(O0_obj, false, pn, succeed);
1804 delayed()->nop();
1805 }
1806
1807 // Check the klassOop of this object for being in the right area of memory.
1808 // Cannot do the load in the delay above slot in case O0 is null
1809 load_klass(O0_obj, O0_obj);
1810 // assert((klass & klass_mask) == klass_bits);
1811 if( Universe::verify_klass_mask() != Universe::verify_oop_mask() )
1812 set(Universe::verify_klass_mask(), O2_mask);
1813 if( Universe::verify_klass_bits() != Universe::verify_oop_bits() )
1814 set(Universe::verify_klass_bits(), O3_bits);
1815 and3(O0_obj, O2_mask, O4_temp);
1816 cmp(O4_temp, O3_bits);
1817 brx(notEqual, false, pn, fail);
1818 delayed()->nop();
1819 // Check the klass's klass
1820 load_klass(O0_obj, O0_obj);
1821 and3(O0_obj, O2_mask, O4_temp);
1822 cmp(O4_temp, O3_bits);
1823 brx(notEqual, false, pn, fail);
1824 delayed()->wrccr( O5_save_flags ); // Restore CCR's
1825
1826 // mark upper end of faulting range
1827 _verify_oop_implicit_branch[1] = pc();
1828
1829 //-----------------------
1830 // all tests pass
1831 bind(succeed);
1832
1833 // Restore prior 64-bit registers
1834 ldx(SP,frame::register_save_words*wordSize+STACK_BIAS+0*8,O0);
1835 ldx(SP,frame::register_save_words*wordSize+STACK_BIAS+1*8,O1);
1836 ldx(SP,frame::register_save_words*wordSize+STACK_BIAS+2*8,O2);
1837 ldx(SP,frame::register_save_words*wordSize+STACK_BIAS+3*8,O3);
1838 ldx(SP,frame::register_save_words*wordSize+STACK_BIAS+4*8,O4);
1839 ldx(SP,frame::register_save_words*wordSize+STACK_BIAS+5*8,O5);
1840
1841 retl(); // Leaf return; restore prior O7 in delay slot
1842 delayed()->ldx(SP,frame::register_save_words*wordSize+STACK_BIAS+7*8,O7);
1843
1844 //-----------------------
1845 bind(null_or_fail); // nulls are less common but OK
1846 br_null(O0_obj, false, pt, succeed);
1847 delayed()->wrccr( O5_save_flags ); // Restore CCR's
1848
1849 //-----------------------
1850 // report failure:
1851 bind(fail);
1852 _verify_oop_implicit_branch[2] = pc();
1853
1854 wrccr( O5_save_flags ); // Restore CCR's
1855
1856 save_frame(::round_to(sizeof(RegistersForDebugging) / BytesPerWord, 2));
1857
1858 // stop_subroutine expects message pointer in I1.
1859 mov(I1, O1);
1860
1861 // Restore prior 64-bit registers
1862 ldx(FP,frame::register_save_words*wordSize+STACK_BIAS+0*8,I0);
1863 ldx(FP,frame::register_save_words*wordSize+STACK_BIAS+1*8,I1);
1864 ldx(FP,frame::register_save_words*wordSize+STACK_BIAS+2*8,I2);
1865 ldx(FP,frame::register_save_words*wordSize+STACK_BIAS+3*8,I3);
1866 ldx(FP,frame::register_save_words*wordSize+STACK_BIAS+4*8,I4);
1867 ldx(FP,frame::register_save_words*wordSize+STACK_BIAS+5*8,I5);
1868
1869 // factor long stop-sequence into subroutine to save space
1870 assert(StubRoutines::Sparc::stop_subroutine_entry_address(), "hasn't been generated yet");
1871
1872 // call indirectly to solve generation ordering problem
1873 Address a(O5, (address)StubRoutines::Sparc::stop_subroutine_entry_address());
1874 load_ptr_contents(a, O5);
1875 jmpl(O5, 0, O7);
1876 delayed()->nop();
1877 }
1878
1879
1880 void MacroAssembler::stop(const char* msg) {
1881 // save frame first to get O7 for return address
1882 // add one word to size in case struct is odd number of words long
1883 // It must be doubleword-aligned for storing doubles into it.
1884
1885 save_frame(::round_to(sizeof(RegistersForDebugging) / BytesPerWord, 2));
1886
1887 // stop_subroutine expects message pointer in I1.
1888 set((intptr_t)msg, O1);
1889
1890 // factor long stop-sequence into subroutine to save space
1891 assert(StubRoutines::Sparc::stop_subroutine_entry_address(), "hasn't been generated yet");
1892
1893 // call indirectly to solve generation ordering problem
1894 Address a(O5, (address)StubRoutines::Sparc::stop_subroutine_entry_address());
1895 load_ptr_contents(a, O5);
1896 jmpl(O5, 0, O7);
1897 delayed()->nop();
1898
1899 breakpoint_trap(); // make stop actually stop rather than writing
1900 // unnoticeable results in the output files.
1901
1902 // restore(); done in callee to save space!
1903 }
1904
1905
1906 void MacroAssembler::warn(const char* msg) {
1907 save_frame(::round_to(sizeof(RegistersForDebugging) / BytesPerWord, 2));
1908 RegistersForDebugging::save_registers(this);
1909 mov(O0, L0);
1910 set((intptr_t)msg, O0);
1911 call( CAST_FROM_FN_PTR(address, warning) );
1912 delayed()->nop();
1913 // ret();
1914 // delayed()->restore();
1915 RegistersForDebugging::restore_registers(this, L0);
1916 restore();
1917 }
1918
1919
1920 void MacroAssembler::untested(const char* what) {
1921 // We must be able to turn interactive prompting off
1922 // in order to run automated test scripts on the VM
1923 // Use the flag ShowMessageBoxOnError
1924
1925 char* b = new char[1024];
1926 sprintf(b, "untested: %s", what);
1927
1928 if ( ShowMessageBoxOnError ) stop(b);
1929 else warn(b);
1930 }
1931
1932
1933 void MacroAssembler::stop_subroutine() {
1934 RegistersForDebugging::save_registers(this);
1935
1936 // for the sake of the debugger, stick a PC on the current frame
1937 // (this assumes that the caller has performed an extra "save")
1938 mov(I7, L7);
1939 add(O7, -7 * BytesPerInt, I7);
1940
1941 save_frame(); // one more save to free up another O7 register
1942 mov(I0, O1); // addr of reg save area
1943
1944 // We expect pointer to message in I1. Caller must set it up in O1
1945 mov(I1, O0); // get msg
1946 call (CAST_FROM_FN_PTR(address, MacroAssembler::debug), relocInfo::runtime_call_type);
1947 delayed()->nop();
1948
1949 restore();
1950
1951 RegistersForDebugging::restore_registers(this, O0);
1952
1953 save_frame(0);
1954 call(CAST_FROM_FN_PTR(address,breakpoint));
1955 delayed()->nop();
1956 restore();
1957
1958 mov(L7, I7);
1959 retl();
1960 delayed()->restore(); // see stop above
1961 }
1962
1963
1964 void MacroAssembler::debug(char* msg, RegistersForDebugging* regs) {
1965 if ( ShowMessageBoxOnError ) {
1966 JavaThreadState saved_state = JavaThread::current()->thread_state();
1967 JavaThread::current()->set_thread_state(_thread_in_vm);
1968 {
1969 // In order to get locks work, we need to fake a in_VM state
1970 ttyLocker ttyl;
1971 ::tty->print_cr("EXECUTION STOPPED: %s\n", msg);
1972 if (CountBytecodes || TraceBytecodes || StopInterpreterAt) {
1973 ::tty->print_cr("Interpreter::bytecode_counter = %d", BytecodeCounter::counter_value());
1974 }
1975 if (os::message_box(msg, "Execution stopped, print registers?"))
1976 regs->print(::tty);
1977 }
1978 ThreadStateTransition::transition(JavaThread::current(), _thread_in_vm, saved_state);
1979 }
1980 else
1981 ::tty->print_cr("=============== DEBUG MESSAGE: %s ================\n", msg);
1982 assert(false, "error");
1983 }
1984
1985
1986 #ifndef PRODUCT
1987 void MacroAssembler::test() {
1988 ResourceMark rm;
1989
1990 CodeBuffer cb("test", 10000, 10000);
1991 MacroAssembler* a = new MacroAssembler(&cb);
1992 VM_Version::allow_all();
1993 a->test_v9();
1994 a->test_v8_onlys();
1995 VM_Version::revert();
1996
1997 StubRoutines::Sparc::test_stop_entry()();
1998 }
1999 #endif
2000
2001
2002 void MacroAssembler::calc_mem_param_words(Register Rparam_words, Register Rresult) {
2003 subcc( Rparam_words, Argument::n_register_parameters, Rresult); // how many mem words?
2004 Label no_extras;
2005 br( negative, true, pt, no_extras ); // if neg, clear reg
2006 delayed()->set( 0, Rresult); // annuled, so only if taken
2007 bind( no_extras );
2008 }
2009
2010
2011 void MacroAssembler::calc_frame_size(Register Rextra_words, Register Rresult) {
2012 #ifdef _LP64
2013 add(Rextra_words, frame::memory_parameter_word_sp_offset, Rresult);
2014 #else
2015 add(Rextra_words, frame::memory_parameter_word_sp_offset + 1, Rresult);
2016 #endif
2017 bclr(1, Rresult);
2018 sll(Rresult, LogBytesPerWord, Rresult); // Rresult has total frame bytes
2019 }
2020
2021
2022 void MacroAssembler::calc_frame_size_and_save(Register Rextra_words, Register Rresult) {
2023 calc_frame_size(Rextra_words, Rresult);
2024 neg(Rresult);
2025 save(SP, Rresult, SP);
2026 }
2027
2028
2029 // ---------------------------------------------------------
2030 Assembler::RCondition cond2rcond(Assembler::Condition c) {
2031 switch (c) {
2032 /*case zero: */
2033 case Assembler::equal: return Assembler::rc_z;
2034 case Assembler::lessEqual: return Assembler::rc_lez;
2035 case Assembler::less: return Assembler::rc_lz;
2036 /*case notZero:*/
2037 case Assembler::notEqual: return Assembler::rc_nz;
2038 case Assembler::greater: return Assembler::rc_gz;
2039 case Assembler::greaterEqual: return Assembler::rc_gez;
2040 }
2041 ShouldNotReachHere();
2042 return Assembler::rc_z;
2043 }
2044
2045 // compares register with zero and branches. NOT FOR USE WITH 64-bit POINTERS
2046 void MacroAssembler::br_zero( Condition c, bool a, Predict p, Register s1, Label& L) {
2047 tst(s1);
2048 br (c, a, p, L);
2049 }
2050
2051
2052 // Compares a pointer register with zero and branches on null.
2053 // Does a test & branch on 32-bit systems and a register-branch on 64-bit.
2054 void MacroAssembler::br_null( Register s1, bool a, Predict p, Label& L ) {
2055 assert_not_delayed();
2056 #ifdef _LP64
2057 bpr( rc_z, a, p, s1, L );
2058 #else
2059 tst(s1);
2060 br ( zero, a, p, L );
2061 #endif
2062 }
2063
2064 void MacroAssembler::br_notnull( Register s1, bool a, Predict p, Label& L ) {
2065 assert_not_delayed();
2066 #ifdef _LP64
2067 bpr( rc_nz, a, p, s1, L );
2068 #else
2069 tst(s1);
2070 br ( notZero, a, p, L );
2071 #endif
2072 }
2073
2074 void MacroAssembler::br_on_reg_cond( RCondition rc, bool a, Predict p,
2075 Register s1, address d,
2076 relocInfo::relocType rt ) {
2077 if (VM_Version::v9_instructions_work()) {
2078 bpr(rc, a, p, s1, d, rt);
2079 } else {
2080 tst(s1);
2081 br(reg_cond_to_cc_cond(rc), a, p, d, rt);
2082 }
2083 }
2084
2085 void MacroAssembler::br_on_reg_cond( RCondition rc, bool a, Predict p,
2086 Register s1, Label& L ) {
2087 if (VM_Version::v9_instructions_work()) {
2088 bpr(rc, a, p, s1, L);
2089 } else {
2090 tst(s1);
2091 br(reg_cond_to_cc_cond(rc), a, p, L);
2092 }
2093 }
2094
2095
2096 // instruction sequences factored across compiler & interpreter
2097
2098
2099 void MacroAssembler::lcmp( Register Ra_hi, Register Ra_low,
2100 Register Rb_hi, Register Rb_low,
2101 Register Rresult) {
2102
2103 Label check_low_parts, done;
2104
2105 cmp(Ra_hi, Rb_hi ); // compare hi parts
2106 br(equal, true, pt, check_low_parts);
2107 delayed()->cmp(Ra_low, Rb_low); // test low parts
2108
2109 // And, with an unsigned comparison, it does not matter if the numbers
2110 // are negative or not.
2111 // E.g., -2 cmp -1: the low parts are 0xfffffffe and 0xffffffff.
2112 // The second one is bigger (unsignedly).
2113
2114 // Other notes: The first move in each triplet can be unconditional
2115 // (and therefore probably prefetchable).
2116 // And the equals case for the high part does not need testing,
2117 // since that triplet is reached only after finding the high halves differ.
2118
2119 if (VM_Version::v9_instructions_work()) {
2120
2121 mov ( -1, Rresult);
2122 ba( false, done ); delayed()-> movcc(greater, false, icc, 1, Rresult);
2123 }
2124 else {
2125 br(less, true, pt, done); delayed()-> set(-1, Rresult);
2126 br(greater, true, pt, done); delayed()-> set( 1, Rresult);
2127 }
2128
2129 bind( check_low_parts );
2130
2131 if (VM_Version::v9_instructions_work()) {
2132 mov( -1, Rresult);
2133 movcc(equal, false, icc, 0, Rresult);
2134 movcc(greaterUnsigned, false, icc, 1, Rresult);
2135 }
2136 else {
2137 set(-1, Rresult);
2138 br(equal, true, pt, done); delayed()->set( 0, Rresult);
2139 br(greaterUnsigned, true, pt, done); delayed()->set( 1, Rresult);
2140 }
2141 bind( done );
2142 }
2143
2144 void MacroAssembler::lneg( Register Rhi, Register Rlow ) {
2145 subcc( G0, Rlow, Rlow );
2146 subc( G0, Rhi, Rhi );
2147 }
2148
2149 void MacroAssembler::lshl( Register Rin_high, Register Rin_low,
2150 Register Rcount,
2151 Register Rout_high, Register Rout_low,
2152 Register Rtemp ) {
2153
2154
2155 Register Ralt_count = Rtemp;
2156 Register Rxfer_bits = Rtemp;
2157
2158 assert( Ralt_count != Rin_high
2159 && Ralt_count != Rin_low
2160 && Ralt_count != Rcount
2161 && Rxfer_bits != Rin_low
2162 && Rxfer_bits != Rin_high
2163 && Rxfer_bits != Rcount
2164 && Rxfer_bits != Rout_low
2165 && Rout_low != Rin_high,
2166 "register alias checks");
2167
2168 Label big_shift, done;
2169
2170 // This code can be optimized to use the 64 bit shifts in V9.
2171 // Here we use the 32 bit shifts.
2172
2173 and3( Rcount, 0x3f, Rcount); // take least significant 6 bits
2174 subcc(Rcount, 31, Ralt_count);
2175 br(greater, true, pn, big_shift);
2176 delayed()->
2177 dec(Ralt_count);
2178
2179 // shift < 32 bits, Ralt_count = Rcount-31
2180
2181 // We get the transfer bits by shifting right by 32-count the low
2182 // register. This is done by shifting right by 31-count and then by one
2183 // more to take care of the special (rare) case where count is zero
2184 // (shifting by 32 would not work).
2185
2186 neg( Ralt_count );
2187
2188 // The order of the next two instructions is critical in the case where
2189 // Rin and Rout are the same and should not be reversed.
2190
2191 srl( Rin_low, Ralt_count, Rxfer_bits ); // shift right by 31-count
2192 if (Rcount != Rout_low) {
2193 sll( Rin_low, Rcount, Rout_low ); // low half
2194 }
2195 sll( Rin_high, Rcount, Rout_high );
2196 if (Rcount == Rout_low) {
2197 sll( Rin_low, Rcount, Rout_low ); // low half
2198 }
2199 srl( Rxfer_bits, 1, Rxfer_bits ); // shift right by one more
2200 ba (false, done);
2201 delayed()->
2202 or3( Rout_high, Rxfer_bits, Rout_high); // new hi value: or in shifted old hi part and xfer from low
2203
2204 // shift >= 32 bits, Ralt_count = Rcount-32
2205 bind(big_shift);
2206 sll( Rin_low, Ralt_count, Rout_high );
2207 clr( Rout_low );
2208
2209 bind(done);
2210 }
2211
2212
2213 void MacroAssembler::lshr( Register Rin_high, Register Rin_low,
2214 Register Rcount,
2215 Register Rout_high, Register Rout_low,
2216 Register Rtemp ) {
2217
2218 Register Ralt_count = Rtemp;
2219 Register Rxfer_bits = Rtemp;
2220
2221 assert( Ralt_count != Rin_high
2222 && Ralt_count != Rin_low
2223 && Ralt_count != Rcount
2224 && Rxfer_bits != Rin_low
2225 && Rxfer_bits != Rin_high
2226 && Rxfer_bits != Rcount
2227 && Rxfer_bits != Rout_high
2228 && Rout_high != Rin_low,
2229 "register alias checks");
2230
2231 Label big_shift, done;
2232
2233 // This code can be optimized to use the 64 bit shifts in V9.
2234 // Here we use the 32 bit shifts.
2235
2236 and3( Rcount, 0x3f, Rcount); // take least significant 6 bits
2237 subcc(Rcount, 31, Ralt_count);
2238 br(greater, true, pn, big_shift);
2239 delayed()->dec(Ralt_count);
2240
2241 // shift < 32 bits, Ralt_count = Rcount-31
2242
2243 // We get the transfer bits by shifting left by 32-count the high
2244 // register. This is done by shifting left by 31-count and then by one
2245 // more to take care of the special (rare) case where count is zero
2246 // (shifting by 32 would not work).
2247
2248 neg( Ralt_count );
2249 if (Rcount != Rout_low) {
2250 srl( Rin_low, Rcount, Rout_low );
2251 }
2252
2253 // The order of the next two instructions is critical in the case where
2254 // Rin and Rout are the same and should not be reversed.
2255
2256 sll( Rin_high, Ralt_count, Rxfer_bits ); // shift left by 31-count
2257 sra( Rin_high, Rcount, Rout_high ); // high half
2258 sll( Rxfer_bits, 1, Rxfer_bits ); // shift left by one more
2259 if (Rcount == Rout_low) {
2260 srl( Rin_low, Rcount, Rout_low );
2261 }
2262 ba (false, done);
2263 delayed()->
2264 or3( Rout_low, Rxfer_bits, Rout_low ); // new low value: or shifted old low part and xfer from high
2265
2266 // shift >= 32 bits, Ralt_count = Rcount-32
2267 bind(big_shift);
2268
2269 sra( Rin_high, Ralt_count, Rout_low );
2270 sra( Rin_high, 31, Rout_high ); // sign into hi
2271
2272 bind( done );
2273 }
2274
2275
2276
2277 void MacroAssembler::lushr( Register Rin_high, Register Rin_low,
2278 Register Rcount,
2279 Register Rout_high, Register Rout_low,
2280 Register Rtemp ) {
2281
2282 Register Ralt_count = Rtemp;
2283 Register Rxfer_bits = Rtemp;
2284
2285 assert( Ralt_count != Rin_high
2286 && Ralt_count != Rin_low
2287 && Ralt_count != Rcount
2288 && Rxfer_bits != Rin_low
2289 && Rxfer_bits != Rin_high
2290 && Rxfer_bits != Rcount
2291 && Rxfer_bits != Rout_high
2292 && Rout_high != Rin_low,
2293 "register alias checks");
2294
2295 Label big_shift, done;
2296
2297 // This code can be optimized to use the 64 bit shifts in V9.
2298 // Here we use the 32 bit shifts.
2299
2300 and3( Rcount, 0x3f, Rcount); // take least significant 6 bits
2301 subcc(Rcount, 31, Ralt_count);
2302 br(greater, true, pn, big_shift);
2303 delayed()->dec(Ralt_count);
2304
2305 // shift < 32 bits, Ralt_count = Rcount-31
2306
2307 // We get the transfer bits by shifting left by 32-count the high
2308 // register. This is done by shifting left by 31-count and then by one
2309 // more to take care of the special (rare) case where count is zero
2310 // (shifting by 32 would not work).
2311
2312 neg( Ralt_count );
2313 if (Rcount != Rout_low) {
2314 srl( Rin_low, Rcount, Rout_low );
2315 }
2316
2317 // The order of the next two instructions is critical in the case where
2318 // Rin and Rout are the same and should not be reversed.
2319
2320 sll( Rin_high, Ralt_count, Rxfer_bits ); // shift left by 31-count
2321 srl( Rin_high, Rcount, Rout_high ); // high half
2322 sll( Rxfer_bits, 1, Rxfer_bits ); // shift left by one more
2323 if (Rcount == Rout_low) {
2324 srl( Rin_low, Rcount, Rout_low );
2325 }
2326 ba (false, done);
2327 delayed()->
2328 or3( Rout_low, Rxfer_bits, Rout_low ); // new low value: or shifted old low part and xfer from high
2329
2330 // shift >= 32 bits, Ralt_count = Rcount-32
2331 bind(big_shift);
2332
2333 srl( Rin_high, Ralt_count, Rout_low );
2334 clr( Rout_high );
2335
2336 bind( done );
2337 }
2338
2339 #ifdef _LP64
2340 void MacroAssembler::lcmp( Register Ra, Register Rb, Register Rresult) {
2341 cmp(Ra, Rb);
2342 mov( -1, Rresult);
2343 movcc(equal, false, xcc, 0, Rresult);
2344 movcc(greater, false, xcc, 1, Rresult);
2345 }
2346 #endif
2347
2348
2349 void MacroAssembler::float_cmp( bool is_float, int unordered_result,
2350 FloatRegister Fa, FloatRegister Fb,
2351 Register Rresult) {
2352
2353 fcmp(is_float ? FloatRegisterImpl::S : FloatRegisterImpl::D, fcc0, Fa, Fb);
2354
2355 Condition lt = unordered_result == -1 ? f_unorderedOrLess : f_less;
2356 Condition eq = f_equal;
2357 Condition gt = unordered_result == 1 ? f_unorderedOrGreater : f_greater;
2358
2359 if (VM_Version::v9_instructions_work()) {
2360
2361 mov( -1, Rresult );
2362 movcc( eq, true, fcc0, 0, Rresult );
2363 movcc( gt, true, fcc0, 1, Rresult );
2364
2365 } else {
2366 Label done;
2367
2368 set( -1, Rresult );
2369 //fb(lt, true, pn, done); delayed()->set( -1, Rresult );
2370 fb( eq, true, pn, done); delayed()->set( 0, Rresult );
2371 fb( gt, true, pn, done); delayed()->set( 1, Rresult );
2372
2373 bind (done);
2374 }
2375 }
2376
2377
2378 void MacroAssembler::fneg( FloatRegisterImpl::Width w, FloatRegister s, FloatRegister d)
2379 {
2380 if (VM_Version::v9_instructions_work()) {
2381 Assembler::fneg(w, s, d);
2382 } else {
2383 if (w == FloatRegisterImpl::S) {
2384 Assembler::fneg(w, s, d);
2385 } else if (w == FloatRegisterImpl::D) {
2386 // number() does a sanity check on the alignment.
2387 assert(((s->encoding(FloatRegisterImpl::D) & 1) == 0) &&
2388 ((d->encoding(FloatRegisterImpl::D) & 1) == 0), "float register alignment check");
2389
2390 Assembler::fneg(FloatRegisterImpl::S, s, d);
2391 Assembler::fmov(FloatRegisterImpl::S, s->successor(), d->successor());
2392 } else {
2393 assert(w == FloatRegisterImpl::Q, "Invalid float register width");
2394
2395 // number() does a sanity check on the alignment.
2396 assert(((s->encoding(FloatRegisterImpl::D) & 3) == 0) &&
2397 ((d->encoding(FloatRegisterImpl::D) & 3) == 0), "float register alignment check");
2398
2399 Assembler::fneg(FloatRegisterImpl::S, s, d);
2400 Assembler::fmov(FloatRegisterImpl::S, s->successor(), d->successor());
2401 Assembler::fmov(FloatRegisterImpl::S, s->successor()->successor(), d->successor()->successor());
2402 Assembler::fmov(FloatRegisterImpl::S, s->successor()->successor()->successor(), d->successor()->successor()->successor());
2403 }
2404 }
2405 }
2406
2407 void MacroAssembler::fmov( FloatRegisterImpl::Width w, FloatRegister s, FloatRegister d)
2408 {
2409 if (VM_Version::v9_instructions_work()) {
2410 Assembler::fmov(w, s, d);
2411 } else {
2412 if (w == FloatRegisterImpl::S) {
2413 Assembler::fmov(w, s, d);
2414 } else if (w == FloatRegisterImpl::D) {
2415 // number() does a sanity check on the alignment.
2416 assert(((s->encoding(FloatRegisterImpl::D) & 1) == 0) &&
2417 ((d->encoding(FloatRegisterImpl::D) & 1) == 0), "float register alignment check");
2418
2419 Assembler::fmov(FloatRegisterImpl::S, s, d);
2420 Assembler::fmov(FloatRegisterImpl::S, s->successor(), d->successor());
2421 } else {
2422 assert(w == FloatRegisterImpl::Q, "Invalid float register width");
2423
2424 // number() does a sanity check on the alignment.
2425 assert(((s->encoding(FloatRegisterImpl::D) & 3) == 0) &&
2426 ((d->encoding(FloatRegisterImpl::D) & 3) == 0), "float register alignment check");
2427
2428 Assembler::fmov(FloatRegisterImpl::S, s, d);
2429 Assembler::fmov(FloatRegisterImpl::S, s->successor(), d->successor());
2430 Assembler::fmov(FloatRegisterImpl::S, s->successor()->successor(), d->successor()->successor());
2431 Assembler::fmov(FloatRegisterImpl::S, s->successor()->successor()->successor(), d->successor()->successor()->successor());
2432 }
2433 }
2434 }
2435
2436 void MacroAssembler::fabs( FloatRegisterImpl::Width w, FloatRegister s, FloatRegister d)
2437 {
2438 if (VM_Version::v9_instructions_work()) {
2439 Assembler::fabs(w, s, d);
2440 } else {
2441 if (w == FloatRegisterImpl::S) {
2442 Assembler::fabs(w, s, d);
2443 } else if (w == FloatRegisterImpl::D) {
2444 // number() does a sanity check on the alignment.
2445 assert(((s->encoding(FloatRegisterImpl::D) & 1) == 0) &&
2446 ((d->encoding(FloatRegisterImpl::D) & 1) == 0), "float register alignment check");
2447
2448 Assembler::fabs(FloatRegisterImpl::S, s, d);
2449 Assembler::fmov(FloatRegisterImpl::S, s->successor(), d->successor());
2450 } else {
2451 assert(w == FloatRegisterImpl::Q, "Invalid float register width");
2452
2453 // number() does a sanity check on the alignment.
2454 assert(((s->encoding(FloatRegisterImpl::D) & 3) == 0) &&
2455 ((d->encoding(FloatRegisterImpl::D) & 3) == 0), "float register alignment check");
2456
2457 Assembler::fabs(FloatRegisterImpl::S, s, d);
2458 Assembler::fmov(FloatRegisterImpl::S, s->successor(), d->successor());
2459 Assembler::fmov(FloatRegisterImpl::S, s->successor()->successor(), d->successor()->successor());
2460 Assembler::fmov(FloatRegisterImpl::S, s->successor()->successor()->successor(), d->successor()->successor()->successor());
2461 }
2462 }
2463 }
2464
2465 void MacroAssembler::save_all_globals_into_locals() {
2466 mov(G1,L1);
2467 mov(G2,L2);
2468 mov(G3,L3);
2469 mov(G4,L4);
2470 mov(G5,L5);
2471 mov(G6,L6);
2472 mov(G7,L7);
2473 }
2474
2475 void MacroAssembler::restore_globals_from_locals() {
2476 mov(L1,G1);
2477 mov(L2,G2);
2478 mov(L3,G3);
2479 mov(L4,G4);
2480 mov(L5,G5);
2481 mov(L6,G6);
2482 mov(L7,G7);
2483 }
2484
2485 // Use for 64 bit operation.
2486 void MacroAssembler::casx_under_lock(Register top_ptr_reg, Register top_reg, Register ptr_reg, address lock_addr, bool use_call_vm)
2487 {
2488 // store ptr_reg as the new top value
2489 #ifdef _LP64
2490 casx(top_ptr_reg, top_reg, ptr_reg);
2491 #else
2492 cas_under_lock(top_ptr_reg, top_reg, ptr_reg, lock_addr, use_call_vm);
2493 #endif // _LP64
2494 }
2495
2496 // [RGV] This routine does not handle 64 bit operations.
2497 // use casx_under_lock() or casx directly!!!
2498 void MacroAssembler::cas_under_lock(Register top_ptr_reg, Register top_reg, Register ptr_reg, address lock_addr, bool use_call_vm)
2499 {
2500 // store ptr_reg as the new top value
2501 if (VM_Version::v9_instructions_work()) {
2502 cas(top_ptr_reg, top_reg, ptr_reg);
2503 } else {
2504
2505 // If the register is not an out nor global, it is not visible
2506 // after the save. Allocate a register for it, save its
2507 // value in the register save area (the save may not flush
2508 // registers to the save area).
2509
2510 Register top_ptr_reg_after_save;
2511 Register top_reg_after_save;
2512 Register ptr_reg_after_save;
2513
2514 if (top_ptr_reg->is_out() || top_ptr_reg->is_global()) {
2515 top_ptr_reg_after_save = top_ptr_reg->after_save();
2516 } else {
2517 Address reg_save_addr = top_ptr_reg->address_in_saved_window();
2518 top_ptr_reg_after_save = L0;
2519 st(top_ptr_reg, reg_save_addr);
2520 }
2521
2522 if (top_reg->is_out() || top_reg->is_global()) {
2523 top_reg_after_save = top_reg->after_save();
2524 } else {
2525 Address reg_save_addr = top_reg->address_in_saved_window();
2526 top_reg_after_save = L1;
2527 st(top_reg, reg_save_addr);
2528 }
2529
2530 if (ptr_reg->is_out() || ptr_reg->is_global()) {
2531 ptr_reg_after_save = ptr_reg->after_save();
2532 } else {
2533 Address reg_save_addr = ptr_reg->address_in_saved_window();
2534 ptr_reg_after_save = L2;
2535 st(ptr_reg, reg_save_addr);
2536 }
2537
2538 const Register& lock_reg = L3;
2539 const Register& lock_ptr_reg = L4;
2540 const Register& value_reg = L5;
2541 const Register& yield_reg = L6;
2542 const Register& yieldall_reg = L7;
2543
2544 save_frame();
2545
2546 if (top_ptr_reg_after_save == L0) {
2547 ld(top_ptr_reg->address_in_saved_window().after_save(), top_ptr_reg_after_save);
2548 }
2549
2550 if (top_reg_after_save == L1) {
2551 ld(top_reg->address_in_saved_window().after_save(), top_reg_after_save);
2552 }
2553
2554 if (ptr_reg_after_save == L2) {
2555 ld(ptr_reg->address_in_saved_window().after_save(), ptr_reg_after_save);
2556 }
2557
2558 Label(retry_get_lock);
2559 Label(not_same);
2560 Label(dont_yield);
2561
2562 assert(lock_addr, "lock_address should be non null for v8");
2563 set((intptr_t)lock_addr, lock_ptr_reg);
2564 // Initialize yield counter
2565 mov(G0,yield_reg);
2566 mov(G0, yieldall_reg);
2567 set(StubRoutines::Sparc::locked, lock_reg);
2568
2569 bind(retry_get_lock);
2570 cmp(yield_reg, V8AtomicOperationUnderLockSpinCount);
2571 br(Assembler::less, false, Assembler::pt, dont_yield);
2572 delayed()->nop();
2573
2574 if(use_call_vm) {
2575 Untested("Need to verify global reg consistancy");
2576 call_VM(noreg, CAST_FROM_FN_PTR(address, SharedRuntime::yield_all), yieldall_reg);
2577 } else {
2578 // Save the regs and make space for a C call
2579 save(SP, -96, SP);
2580 save_all_globals_into_locals();
2581 call(CAST_FROM_FN_PTR(address,os::yield_all));
2582 delayed()->mov(yieldall_reg, O0);
2583 restore_globals_from_locals();
2584 restore();
2585 }
2586
2587 // reset the counter
2588 mov(G0,yield_reg);
2589 add(yieldall_reg, 1, yieldall_reg);
2590
2591 bind(dont_yield);
2592 // try to get lock
2593 swap(lock_ptr_reg, 0, lock_reg);
2594
2595 // did we get the lock?
2596 cmp(lock_reg, StubRoutines::Sparc::unlocked);
2597 br(Assembler::notEqual, true, Assembler::pn, retry_get_lock);
2598 delayed()->add(yield_reg,1,yield_reg);
2599
2600 // yes, got lock. do we have the same top?
2601 ld(top_ptr_reg_after_save, 0, value_reg);
2602 cmp(value_reg, top_reg_after_save);
2603 br(Assembler::notEqual, false, Assembler::pn, not_same);
2604 delayed()->nop();
2605
2606 // yes, same top.
2607 st(ptr_reg_after_save, top_ptr_reg_after_save, 0);
2608 membar(Assembler::StoreStore);
2609
2610 bind(not_same);
2611 mov(value_reg, ptr_reg_after_save);
2612 st(lock_reg, lock_ptr_reg, 0); // unlock
2613
2614 restore();
2615 }
2616 }
2617
2618 RegisterConstant MacroAssembler::delayed_value(intptr_t* delayed_value_addr,
2619 Register tmp,
2620 int offset) {
2621 intptr_t value = *delayed_value_addr;
2622 if (value != 0)
2623 return value + offset;
2624
2625 // load indirectly to solve generation ordering problem
2626 Address a(tmp, (address) delayed_value_addr);
2627 load_ptr_contents(a, tmp);
2628
2629 #ifdef ASSERT
2630 tst(tmp);
2631 breakpoint_trap(zero, xcc);
2632 #endif
2633
2634 if (offset != 0)
2635 add(tmp, offset, tmp);
2636
2637 return tmp;
2638 }
2639
2640
2641 void MacroAssembler::lookup_interface_method(Register recv_klass,
2642 Register intf_klass,
2643 RegisterConstant itable_index,
2644 Register method_result,
2645 Register scan_temp,
2646 Label& L_no_such_interface) {
2647 Unimplemented();
2648 }
2649
2650
2651 // Test sub_klass against super_klass.
2652 // Fall through on failure, but branch to L_success if there is a match.
2653 // Use up the given temp_reg, but don't kill any other register.
2654 // Update the sub's secondary super cache if necesary.
2655 void MacroAssembler::check_klass_subtype(Register sub_klass,
2656 Register super_klass,
2657 Register temp_reg,
2658 Label& L_success) {
2659 Unimplemented();
2660 }
2661
2662
2663 void MacroAssembler::check_method_handle_type(Register mtype_reg, Register mh_reg,
2664 Register temp_reg,
2665 Label& wrong_method_type) {
2666 assert_different_registers(mtype_reg, mh_reg, temp_reg);
2667 // compare method type against that of the receiver
2668 RegisterConstant mhtype_offset = delayed_value(java_dyn_MethodHandle::type_offset_in_bytes, temp_reg);
2669 ld_ptr(mh_reg, mhtype_offset, temp_reg);
2670 cmp(temp_reg, mtype_reg);
2671 br(Assembler::notEqual, false, Assembler::pn, wrong_method_type);
2672 delayed()->nop();
2673 }
2674
2675
2676 void MacroAssembler::jump_to_method_handle_entry(Register mh_reg, Register temp_reg) {
2677 assert(mh_reg == G3_method_handle, "caller must put MH object in G3");
2678 assert_different_registers(mh_reg, temp_reg);
2679
2680 // pick out the interpreted side of the handler
2681 ld_ptr(mh_reg, delayed_value(java_dyn_MethodHandle::vmentry_offset_in_bytes, temp_reg), temp_reg);
2682
2683 // off we go...
2684 ld_ptr(temp_reg, MethodEntry::from_interpreted_entry_offset_in_bytes(), temp_reg);
2685 jmp(temp_reg, 0);
2686
2687 // for the various stubs which take control at this point,
2688 // see MethodHandles::generate_method_handle_stub
2689 }
2690
2691 RegisterConstant MacroAssembler::argument_offset(RegisterConstant arg_slot,
2692 int extra_slot_offset) {
2693 // cf. TemplateTable::prepare_invoke(), if (load_receiver).
2694 int stackElementSize = Interpreter::stackElementWords() * wordSize;
2695 int offset = Interpreter::expr_offset_in_bytes(extra_slot_offset+0);
2696 int offset1 = Interpreter::expr_offset_in_bytes(extra_slot_offset+1);
2697 assert(offset1 - offset == stackElementSize, "correct arithmetic");
2698 if (arg_slot.is_constant()) {
2699 offset += arg_slot.as_constant() * stackElementSize;
2700 return offset;
2701 } else {
2702 Register temp = arg_slot.as_register();
2703 sll_ptr(temp, exact_log2(stackElementSize), temp);
2704 if (offset != 0)
2705 add(temp, offset, temp);
2706 return temp;
2707 }
2708 }
2709
2710
2711
2712 void MacroAssembler::biased_locking_enter(Register obj_reg, Register mark_reg,
2713 Register temp_reg,
2714 Label& done, Label* slow_case,
2715 BiasedLockingCounters* counters) {
2716 assert(UseBiasedLocking, "why call this otherwise?");
2717
2718 if (PrintBiasedLockingStatistics) {
2719 assert_different_registers(obj_reg, mark_reg, temp_reg, O7);
2720 if (counters == NULL)
2721 counters = BiasedLocking::counters();
2722 }
2723
2724 Label cas_label;
2725
2726 // Biased locking
2727 // See whether the lock is currently biased toward our thread and
2728 // whether the epoch is still valid
2729 // Note that the runtime guarantees sufficient alignment of JavaThread
2730 // pointers to allow age to be placed into low bits
2731 assert(markOopDesc::age_shift == markOopDesc::lock_bits + markOopDesc::biased_lock_bits, "biased locking makes assumptions about bit layout");
2732 and3(mark_reg, markOopDesc::biased_lock_mask_in_place, temp_reg);
2733 cmp(temp_reg, markOopDesc::biased_lock_pattern);
2734 brx(Assembler::notEqual, false, Assembler::pn, cas_label);
2735 delayed()->nop();
2736
2737 load_klass(obj_reg, temp_reg);
2738 ld_ptr(Address(temp_reg, 0, Klass::prototype_header_offset_in_bytes() + klassOopDesc::klass_part_offset_in_bytes()), temp_reg);
2739 or3(G2_thread, temp_reg, temp_reg);
2740 xor3(mark_reg, temp_reg, temp_reg);
2741 andcc(temp_reg, ~((int) markOopDesc::age_mask_in_place), temp_reg);
2742 if (counters != NULL) {
2743 cond_inc(Assembler::equal, (address) counters->biased_lock_entry_count_addr(), mark_reg, temp_reg);
2744 // Reload mark_reg as we may need it later
2745 ld_ptr(Address(obj_reg, 0, oopDesc::mark_offset_in_bytes()), mark_reg);
2746 }
2747 brx(Assembler::equal, true, Assembler::pt, done);
2748 delayed()->nop();
2749
2750 Label try_revoke_bias;
2751 Label try_rebias;
2752 Address mark_addr = Address(obj_reg, 0, oopDesc::mark_offset_in_bytes());
2753 assert(mark_addr.disp() == 0, "cas must take a zero displacement");
2754
2755 // At this point we know that the header has the bias pattern and
2756 // that we are not the bias owner in the current epoch. We need to
2757 // figure out more details about the state of the header in order to
2758 // know what operations can be legally performed on the object's
2759 // header.
2760
2761 // If the low three bits in the xor result aren't clear, that means
2762 // the prototype header is no longer biased and we have to revoke
2763 // the bias on this object.
2764 btst(markOopDesc::biased_lock_mask_in_place, temp_reg);
2765 brx(Assembler::notZero, false, Assembler::pn, try_revoke_bias);
2766
2767 // Biasing is still enabled for this data type. See whether the
2768 // epoch of the current bias is still valid, meaning that the epoch
2769 // bits of the mark word are equal to the epoch bits of the
2770 // prototype header. (Note that the prototype header's epoch bits
2771 // only change at a safepoint.) If not, attempt to rebias the object
2772 // toward the current thread. Note that we must be absolutely sure
2773 // that the current epoch is invalid in order to do this because
2774 // otherwise the manipulations it performs on the mark word are
2775 // illegal.
2776 delayed()->btst(markOopDesc::epoch_mask_in_place, temp_reg);
2777 brx(Assembler::notZero, false, Assembler::pn, try_rebias);
2778
2779 // The epoch of the current bias is still valid but we know nothing
2780 // about the owner; it might be set or it might be clear. Try to
2781 // acquire the bias of the object using an atomic operation. If this
2782 // fails we will go in to the runtime to revoke the object's bias.
2783 // Note that we first construct the presumed unbiased header so we
2784 // don't accidentally blow away another thread's valid bias.
2785 delayed()->and3(mark_reg,
2786 markOopDesc::biased_lock_mask_in_place | markOopDesc::age_mask_in_place | markOopDesc::epoch_mask_in_place,
2787 mark_reg);
2788 or3(G2_thread, mark_reg, temp_reg);
2789 casn(mark_addr.base(), mark_reg, temp_reg);
2790 // If the biasing toward our thread failed, this means that
2791 // another thread succeeded in biasing it toward itself and we
2792 // need to revoke that bias. The revocation will occur in the
2793 // interpreter runtime in the slow case.
2794 cmp(mark_reg, temp_reg);
2795 if (counters != NULL) {
2796 cond_inc(Assembler::zero, (address) counters->anonymously_biased_lock_entry_count_addr(), mark_reg, temp_reg);
2797 }
2798 if (slow_case != NULL) {
2799 brx(Assembler::notEqual, true, Assembler::pn, *slow_case);
2800 delayed()->nop();
2801 }
2802 br(Assembler::always, false, Assembler::pt, done);
2803 delayed()->nop();
2804
2805 bind(try_rebias);
2806 // At this point we know the epoch has expired, meaning that the
2807 // current "bias owner", if any, is actually invalid. Under these
2808 // circumstances _only_, we are allowed to use the current header's
2809 // value as the comparison value when doing the cas to acquire the
2810 // bias in the current epoch. In other words, we allow transfer of
2811 // the bias from one thread to another directly in this situation.
2812 //
2813 // FIXME: due to a lack of registers we currently blow away the age
2814 // bits in this situation. Should attempt to preserve them.
2815 load_klass(obj_reg, temp_reg);
2816 ld_ptr(Address(temp_reg, 0, Klass::prototype_header_offset_in_bytes() + klassOopDesc::klass_part_offset_in_bytes()), temp_reg);
2817 or3(G2_thread, temp_reg, temp_reg);
2818 casn(mark_addr.base(), mark_reg, temp_reg);
2819 // If the biasing toward our thread failed, this means that
2820 // another thread succeeded in biasing it toward itself and we
2821 // need to revoke that bias. The revocation will occur in the
2822 // interpreter runtime in the slow case.
2823 cmp(mark_reg, temp_reg);
2824 if (counters != NULL) {
2825 cond_inc(Assembler::zero, (address) counters->rebiased_lock_entry_count_addr(), mark_reg, temp_reg);
2826 }
2827 if (slow_case != NULL) {
2828 brx(Assembler::notEqual, true, Assembler::pn, *slow_case);
2829 delayed()->nop();
2830 }
2831 br(Assembler::always, false, Assembler::pt, done);
2832 delayed()->nop();
2833
2834 bind(try_revoke_bias);
2835 // The prototype mark in the klass doesn't have the bias bit set any
2836 // more, indicating that objects of this data type are not supposed
2837 // to be biased any more. We are going to try to reset the mark of
2838 // this object to the prototype value and fall through to the
2839 // CAS-based locking scheme. Note that if our CAS fails, it means
2840 // that another thread raced us for the privilege of revoking the
2841 // bias of this particular object, so it's okay to continue in the
2842 // normal locking code.
2843 //
2844 // FIXME: due to a lack of registers we currently blow away the age
2845 // bits in this situation. Should attempt to preserve them.
2846 load_klass(obj_reg, temp_reg);
2847 ld_ptr(Address(temp_reg, 0, Klass::prototype_header_offset_in_bytes() + klassOopDesc::klass_part_offset_in_bytes()), temp_reg);
2848 casn(mark_addr.base(), mark_reg, temp_reg);
2849 // Fall through to the normal CAS-based lock, because no matter what
2850 // the result of the above CAS, some thread must have succeeded in
2851 // removing the bias bit from the object's header.
2852 if (counters != NULL) {
2853 cmp(mark_reg, temp_reg);
2854 cond_inc(Assembler::zero, (address) counters->revoked_lock_entry_count_addr(), mark_reg, temp_reg);
2855 }
2856
2857 bind(cas_label);
2858 }
2859
2860 void MacroAssembler::biased_locking_exit (Address mark_addr, Register temp_reg, Label& done,
2861 bool allow_delay_slot_filling) {
2862 // Check for biased locking unlock case, which is a no-op
2863 // Note: we do not have to check the thread ID for two reasons.
2864 // First, the interpreter checks for IllegalMonitorStateException at
2865 // a higher level. Second, if the bias was revoked while we held the
2866 // lock, the object could not be rebiased toward another thread, so
2867 // the bias bit would be clear.
2868 ld_ptr(mark_addr, temp_reg);
2869 and3(temp_reg, markOopDesc::biased_lock_mask_in_place, temp_reg);
2870 cmp(temp_reg, markOopDesc::biased_lock_pattern);
2871 brx(Assembler::equal, allow_delay_slot_filling, Assembler::pt, done);
2872 delayed();
2873 if (!allow_delay_slot_filling) {
2874 nop();
2875 }
2876 }
2877
2878
2879 // CASN -- 32-64 bit switch hitter similar to the synthetic CASN provided by
2880 // Solaris/SPARC's "as". Another apt name would be cas_ptr()
2881
2882 void MacroAssembler::casn (Register addr_reg, Register cmp_reg, Register set_reg ) {
2883 casx_under_lock (addr_reg, cmp_reg, set_reg, (address)StubRoutines::Sparc::atomic_memory_operation_lock_addr()) ;
2884 }
2885
2886
2887
2888 // compiler_lock_object() and compiler_unlock_object() are direct transliterations
2889 // of i486.ad fast_lock() and fast_unlock(). See those methods for detailed comments.
2890 // The code could be tightened up considerably.
2891 //
2892 // box->dhw disposition - post-conditions at DONE_LABEL.
2893 // - Successful inflated lock: box->dhw != 0.
2894 // Any non-zero value suffices.
2895 // Consider G2_thread, rsp, boxReg, or unused_mark()
2896 // - Successful Stack-lock: box->dhw == mark.
2897 // box->dhw must contain the displaced mark word value
2898 // - Failure -- icc.ZFlag == 0 and box->dhw is undefined.
2899 // The slow-path fast_enter() and slow_enter() operators
2900 // are responsible for setting box->dhw = NonZero (typically ::unused_mark).
2901 // - Biased: box->dhw is undefined
2902 //
2903 // SPARC refworkload performance - specifically jetstream and scimark - are
2904 // extremely sensitive to the size of the code emitted by compiler_lock_object
2905 // and compiler_unlock_object. Critically, the key factor is code size, not path
2906 // length. (Simply experiments to pad CLO with unexecuted NOPs demonstrte the
2907 // effect).
2908
2909
2910 void MacroAssembler::compiler_lock_object(Register Roop, Register Rmark,
2911 Register Rbox, Register Rscratch,
2912 BiasedLockingCounters* counters,
2913 bool try_bias) {
2914 Address mark_addr(Roop, 0, oopDesc::mark_offset_in_bytes());
2915
2916 verify_oop(Roop);
2917 Label done ;
2918
2919 if (counters != NULL) {
2920 inc_counter((address) counters->total_entry_count_addr(), Rmark, Rscratch);
2921 }
2922
2923 if (EmitSync & 1) {
2924 mov (3, Rscratch) ;
2925 st_ptr (Rscratch, Rbox, BasicLock::displaced_header_offset_in_bytes());
2926 cmp (SP, G0) ;
2927 return ;
2928 }
2929
2930 if (EmitSync & 2) {
2931
2932 // Fetch object's markword
2933 ld_ptr(mark_addr, Rmark);
2934
2935 if (try_bias) {
2936 biased_locking_enter(Roop, Rmark, Rscratch, done, NULL, counters);
2937 }
2938
2939 // Save Rbox in Rscratch to be used for the cas operation
2940 mov(Rbox, Rscratch);
2941
2942 // set Rmark to markOop | markOopDesc::unlocked_value
2943 or3(Rmark, markOopDesc::unlocked_value, Rmark);
2944
2945 // Initialize the box. (Must happen before we update the object mark!)
2946 st_ptr(Rmark, Rbox, BasicLock::displaced_header_offset_in_bytes());
2947
2948 // compare object markOop with Rmark and if equal exchange Rscratch with object markOop
2949 assert(mark_addr.disp() == 0, "cas must take a zero displacement");
2950 casx_under_lock(mark_addr.base(), Rmark, Rscratch,
2951 (address)StubRoutines::Sparc::atomic_memory_operation_lock_addr());
2952
2953 // if compare/exchange succeeded we found an unlocked object and we now have locked it
2954 // hence we are done
2955 cmp(Rmark, Rscratch);
2956 #ifdef _LP64
2957 sub(Rscratch, STACK_BIAS, Rscratch);
2958 #endif
2959 brx(Assembler::equal, false, Assembler::pt, done);
2960 delayed()->sub(Rscratch, SP, Rscratch); //pull next instruction into delay slot
2961
2962 // we did not find an unlocked object so see if this is a recursive case
2963 // sub(Rscratch, SP, Rscratch);
2964 assert(os::vm_page_size() > 0xfff, "page size too small - change the constant");
2965 andcc(Rscratch, 0xfffff003, Rscratch);
2966 st_ptr(Rscratch, Rbox, BasicLock::displaced_header_offset_in_bytes());
2967 bind (done) ;
2968 return ;
2969 }
2970
2971 Label Egress ;
2972
2973 if (EmitSync & 256) {
2974 Label IsInflated ;
2975
2976 ld_ptr (mark_addr, Rmark); // fetch obj->mark
2977 // Triage: biased, stack-locked, neutral, inflated
2978 if (try_bias) {
2979 biased_locking_enter(Roop, Rmark, Rscratch, done, NULL, counters);
2980 // Invariant: if control reaches this point in the emitted stream
2981 // then Rmark has not been modified.
2982 }
2983
2984 // Store mark into displaced mark field in the on-stack basic-lock "box"
2985 // Critically, this must happen before the CAS
2986 // Maximize the ST-CAS distance to minimize the ST-before-CAS penalty.
2987 st_ptr (Rmark, Rbox, BasicLock::displaced_header_offset_in_bytes());
2988 andcc (Rmark, 2, G0) ;
2989 brx (Assembler::notZero, false, Assembler::pn, IsInflated) ;
2990 delayed() ->
2991
2992 // Try stack-lock acquisition.
2993 // Beware: the 1st instruction is in a delay slot
2994 mov (Rbox, Rscratch);
2995 or3 (Rmark, markOopDesc::unlocked_value, Rmark);
2996 assert (mark_addr.disp() == 0, "cas must take a zero displacement");
2997 casn (mark_addr.base(), Rmark, Rscratch) ;
2998 cmp (Rmark, Rscratch);
2999 brx (Assembler::equal, false, Assembler::pt, done);
3000 delayed()->sub(Rscratch, SP, Rscratch);
3001
3002 // Stack-lock attempt failed - check for recursive stack-lock.
3003 // See the comments below about how we might remove this case.
3004 #ifdef _LP64
3005 sub (Rscratch, STACK_BIAS, Rscratch);
3006 #endif
3007 assert(os::vm_page_size() > 0xfff, "page size too small - change the constant");
3008 andcc (Rscratch, 0xfffff003, Rscratch);
3009 br (Assembler::always, false, Assembler::pt, done) ;
3010 delayed()-> st_ptr (Rscratch, Rbox, BasicLock::displaced_header_offset_in_bytes());
3011
3012 bind (IsInflated) ;
3013 if (EmitSync & 64) {
3014 // If m->owner != null goto IsLocked
3015 // Pessimistic form: Test-and-CAS vs CAS
3016 // The optimistic form avoids RTS->RTO cache line upgrades.
3017 ld_ptr (Address (Rmark, 0, ObjectMonitor::owner_offset_in_bytes()-2), Rscratch) ;
3018 andcc (Rscratch, Rscratch, G0) ;
3019 brx (Assembler::notZero, false, Assembler::pn, done) ;
3020 delayed()->nop() ;
3021 // m->owner == null : it's unlocked.
3022 }
3023
3024 // Try to CAS m->owner from null to Self
3025 // Invariant: if we acquire the lock then _recursions should be 0.
3026 add (Rmark, ObjectMonitor::owner_offset_in_bytes()-2, Rmark) ;
3027 mov (G2_thread, Rscratch) ;
3028 casn (Rmark, G0, Rscratch) ;
3029 cmp (Rscratch, G0) ;
3030 // Intentional fall-through into done
3031 } else {
3032 // Aggressively avoid the Store-before-CAS penalty
3033 // Defer the store into box->dhw until after the CAS
3034 Label IsInflated, Recursive ;
3035
3036 // Anticipate CAS -- Avoid RTS->RTO upgrade
3037 // prefetch (mark_addr, Assembler::severalWritesAndPossiblyReads) ;
3038
3039 ld_ptr (mark_addr, Rmark); // fetch obj->mark
3040 // Triage: biased, stack-locked, neutral, inflated
3041
3042 if (try_bias) {
3043 biased_locking_enter(Roop, Rmark, Rscratch, done, NULL, counters);
3044 // Invariant: if control reaches this point in the emitted stream
3045 // then Rmark has not been modified.
3046 }
3047 andcc (Rmark, 2, G0) ;
3048 brx (Assembler::notZero, false, Assembler::pn, IsInflated) ;
3049 delayed()-> // Beware - dangling delay-slot
3050
3051 // Try stack-lock acquisition.
3052 // Transiently install BUSY (0) encoding in the mark word.
3053 // if the CAS of 0 into the mark was successful then we execute:
3054 // ST box->dhw = mark -- save fetched mark in on-stack basiclock box
3055 // ST obj->mark = box -- overwrite transient 0 value
3056 // This presumes TSO, of course.
3057
3058 mov (0, Rscratch) ;
3059 or3 (Rmark, markOopDesc::unlocked_value, Rmark);
3060 assert (mark_addr.disp() == 0, "cas must take a zero displacement");
3061 casn (mark_addr.base(), Rmark, Rscratch) ;
3062 // prefetch (mark_addr, Assembler::severalWritesAndPossiblyReads) ;
3063 cmp (Rscratch, Rmark) ;
3064 brx (Assembler::notZero, false, Assembler::pn, Recursive) ;
3065 delayed() ->
3066 st_ptr (Rmark, Rbox, BasicLock::displaced_header_offset_in_bytes());
3067 if (counters != NULL) {
3068 cond_inc(Assembler::equal, (address) counters->fast_path_entry_count_addr(), Rmark, Rscratch);
3069 }
3070 br (Assembler::always, false, Assembler::pt, done);
3071 delayed() ->
3072 st_ptr (Rbox, mark_addr) ;
3073
3074 bind (Recursive) ;
3075 // Stack-lock attempt failed - check for recursive stack-lock.
3076 // Tests show that we can remove the recursive case with no impact
3077 // on refworkload 0.83. If we need to reduce the size of the code
3078 // emitted by compiler_lock_object() the recursive case is perfect
3079 // candidate.
3080 //
3081 // A more extreme idea is to always inflate on stack-lock recursion.
3082 // This lets us eliminate the recursive checks in compiler_lock_object
3083 // and compiler_unlock_object and the (box->dhw == 0) encoding.
3084 // A brief experiment - requiring changes to synchronizer.cpp, interpreter,
3085 // and showed a performance *increase*. In the same experiment I eliminated
3086 // the fast-path stack-lock code from the interpreter and always passed
3087 // control to the "slow" operators in synchronizer.cpp.
3088
3089 // RScratch contains the fetched obj->mark value from the failed CASN.
3090 #ifdef _LP64
3091 sub (Rscratch, STACK_BIAS, Rscratch);
3092 #endif
3093 sub(Rscratch, SP, Rscratch);
3094 assert(os::vm_page_size() > 0xfff, "page size too small - change the constant");
3095 andcc (Rscratch, 0xfffff003, Rscratch);
3096 if (counters != NULL) {
3097 // Accounting needs the Rscratch register
3098 st_ptr (Rscratch, Rbox, BasicLock::displaced_header_offset_in_bytes());
3099 cond_inc(Assembler::equal, (address) counters->fast_path_entry_count_addr(), Rmark, Rscratch);
3100 br (Assembler::always, false, Assembler::pt, done) ;
3101 delayed()->nop() ;
3102 } else {
3103 br (Assembler::always, false, Assembler::pt, done) ;
3104 delayed()-> st_ptr (Rscratch, Rbox, BasicLock::displaced_header_offset_in_bytes());
3105 }
3106
3107 bind (IsInflated) ;
3108 if (EmitSync & 64) {
3109 // If m->owner != null goto IsLocked
3110 // Test-and-CAS vs CAS
3111 // Pessimistic form avoids futile (doomed) CAS attempts
3112 // The optimistic form avoids RTS->RTO cache line upgrades.
3113 ld_ptr (Address (Rmark, 0, ObjectMonitor::owner_offset_in_bytes()-2), Rscratch) ;
3114 andcc (Rscratch, Rscratch, G0) ;
3115 brx (Assembler::notZero, false, Assembler::pn, done) ;
3116 delayed()->nop() ;
3117 // m->owner == null : it's unlocked.
3118 }
3119
3120 // Try to CAS m->owner from null to Self
3121 // Invariant: if we acquire the lock then _recursions should be 0.
3122 add (Rmark, ObjectMonitor::owner_offset_in_bytes()-2, Rmark) ;
3123 mov (G2_thread, Rscratch) ;
3124 casn (Rmark, G0, Rscratch) ;
3125 cmp (Rscratch, G0) ;
3126 // ST box->displaced_header = NonZero.
3127 // Any non-zero value suffices:
3128 // unused_mark(), G2_thread, RBox, RScratch, rsp, etc.
3129 st_ptr (Rbox, Rbox, BasicLock::displaced_header_offset_in_bytes());
3130 // Intentional fall-through into done
3131 }
3132
3133 bind (done) ;
3134 }
3135
3136 void MacroAssembler::compiler_unlock_object(Register Roop, Register Rmark,
3137 Register Rbox, Register Rscratch,
3138 bool try_bias) {
3139 Address mark_addr(Roop, 0, oopDesc::mark_offset_in_bytes());
3140
3141 Label done ;
3142
3143 if (EmitSync & 4) {
3144 cmp (SP, G0) ;
3145 return ;
3146 }
3147
3148 if (EmitSync & 8) {
3149 if (try_bias) {
3150 biased_locking_exit(mark_addr, Rscratch, done);
3151 }
3152
3153 // Test first if it is a fast recursive unlock
3154 ld_ptr(Rbox, BasicLock::displaced_header_offset_in_bytes(), Rmark);
3155 cmp(Rmark, G0);
3156 brx(Assembler::equal, false, Assembler::pt, done);
3157 delayed()->nop();
3158
3159 // Check if it is still a light weight lock, this is is true if we see
3160 // the stack address of the basicLock in the markOop of the object
3161 assert(mark_addr.disp() == 0, "cas must take a zero displacement");
3162 casx_under_lock(mark_addr.base(), Rbox, Rmark,
3163 (address)StubRoutines::Sparc::atomic_memory_operation_lock_addr());
3164 br (Assembler::always, false, Assembler::pt, done);
3165 delayed()->cmp(Rbox, Rmark);
3166 bind (done) ;
3167 return ;
3168 }
3169
3170 // Beware ... If the aggregate size of the code emitted by CLO and CUO is
3171 // is too large performance rolls abruptly off a cliff.
3172 // This could be related to inlining policies, code cache management, or
3173 // I$ effects.
3174 Label LStacked ;
3175
3176 if (try_bias) {
3177 // TODO: eliminate redundant LDs of obj->mark
3178 biased_locking_exit(mark_addr, Rscratch, done);
3179 }
3180
3181 ld_ptr (Roop, oopDesc::mark_offset_in_bytes(), Rmark) ;
3182 ld_ptr (Rbox, BasicLock::displaced_header_offset_in_bytes(), Rscratch);
3183 andcc (Rscratch, Rscratch, G0);
3184 brx (Assembler::zero, false, Assembler::pn, done);
3185 delayed()-> nop() ; // consider: relocate fetch of mark, above, into this DS
3186 andcc (Rmark, 2, G0) ;
3187 brx (Assembler::zero, false, Assembler::pt, LStacked) ;
3188 delayed()-> nop() ;
3189
3190 // It's inflated
3191 // Conceptually we need a #loadstore|#storestore "release" MEMBAR before
3192 // the ST of 0 into _owner which releases the lock. This prevents loads
3193 // and stores within the critical section from reordering (floating)
3194 // past the store that releases the lock. But TSO is a strong memory model
3195 // and that particular flavor of barrier is a noop, so we can safely elide it.
3196 // Note that we use 1-0 locking by default for the inflated case. We
3197 // close the resultant (and rare) race by having contented threads in
3198 // monitorenter periodically poll _owner.
3199 ld_ptr (Address(Rmark, 0, ObjectMonitor::owner_offset_in_bytes()-2), Rscratch) ;
3200 ld_ptr (Address(Rmark, 0, ObjectMonitor::recursions_offset_in_bytes()-2), Rbox) ;
3201 xor3 (Rscratch, G2_thread, Rscratch) ;
3202 orcc (Rbox, Rscratch, Rbox) ;
3203 brx (Assembler::notZero, false, Assembler::pn, done) ;
3204 delayed()->
3205 ld_ptr (Address (Rmark, 0, ObjectMonitor::EntryList_offset_in_bytes()-2), Rscratch) ;
3206 ld_ptr (Address (Rmark, 0, ObjectMonitor::cxq_offset_in_bytes()-2), Rbox) ;
3207 orcc (Rbox, Rscratch, G0) ;
3208 if (EmitSync & 65536) {
3209 Label LSucc ;
3210 brx (Assembler::notZero, false, Assembler::pn, LSucc) ;
3211 delayed()->nop() ;
3212 br (Assembler::always, false, Assembler::pt, done) ;
3213 delayed()->
3214 st_ptr (G0, Address (Rmark, 0, ObjectMonitor::owner_offset_in_bytes()-2)) ;
3215
3216 bind (LSucc) ;
3217 st_ptr (G0, Address (Rmark, 0, ObjectMonitor::owner_offset_in_bytes()-2)) ;
3218 if (os::is_MP()) { membar (StoreLoad) ; }
3219 ld_ptr (Address (Rmark, 0, ObjectMonitor::succ_offset_in_bytes()-2), Rscratch) ;
3220 andcc (Rscratch, Rscratch, G0) ;
3221 brx (Assembler::notZero, false, Assembler::pt, done) ;
3222 delayed()-> andcc (G0, G0, G0) ;
3223 add (Rmark, ObjectMonitor::owner_offset_in_bytes()-2, Rmark) ;
3224 mov (G2_thread, Rscratch) ;
3225 casn (Rmark, G0, Rscratch) ;
3226 cmp (Rscratch, G0) ;
3227 // invert icc.zf and goto done
3228 brx (Assembler::notZero, false, Assembler::pt, done) ;
3229 delayed() -> cmp (G0, G0) ;
3230 br (Assembler::always, false, Assembler::pt, done);
3231 delayed() -> cmp (G0, 1) ;
3232 } else {
3233 brx (Assembler::notZero, false, Assembler::pn, done) ;
3234 delayed()->nop() ;
3235 br (Assembler::always, false, Assembler::pt, done) ;
3236 delayed()->
3237 st_ptr (G0, Address (Rmark, 0, ObjectMonitor::owner_offset_in_bytes()-2)) ;
3238 }
3239
3240 bind (LStacked) ;
3241 // Consider: we could replace the expensive CAS in the exit
3242 // path with a simple ST of the displaced mark value fetched from
3243 // the on-stack basiclock box. That admits a race where a thread T2
3244 // in the slow lock path -- inflating with monitor M -- could race a
3245 // thread T1 in the fast unlock path, resulting in a missed wakeup for T2.
3246 // More precisely T1 in the stack-lock unlock path could "stomp" the
3247 // inflated mark value M installed by T2, resulting in an orphan
3248 // object monitor M and T2 becoming stranded. We can remedy that situation
3249 // by having T2 periodically poll the object's mark word using timed wait
3250 // operations. If T2 discovers that a stomp has occurred it vacates
3251 // the monitor M and wakes any other threads stranded on the now-orphan M.
3252 // In addition the monitor scavenger, which performs deflation,
3253 // would also need to check for orpan monitors and stranded threads.
3254 //
3255 // Finally, inflation is also used when T2 needs to assign a hashCode
3256 // to O and O is stack-locked by T1. The "stomp" race could cause
3257 // an assigned hashCode value to be lost. We can avoid that condition
3258 // and provide the necessary hashCode stability invariants by ensuring
3259 // that hashCode generation is idempotent between copying GCs.
3260 // For example we could compute the hashCode of an object O as
3261 // O's heap address XOR some high quality RNG value that is refreshed
3262 // at GC-time. The monitor scavenger would install the hashCode
3263 // found in any orphan monitors. Again, the mechanism admits a
3264 // lost-update "stomp" WAW race but detects and recovers as needed.
3265 //
3266 // A prototype implementation showed excellent results, although
3267 // the scavenger and timeout code was rather involved.
3268
3269 casn (mark_addr.base(), Rbox, Rscratch) ;
3270 cmp (Rbox, Rscratch);
3271 // Intentional fall through into done ...
3272
3273 bind (done) ;
3274 }
3275
3276
3277
3278 void MacroAssembler::print_CPU_state() {
3279 // %%%%% need to implement this
3280 }
3281
3282 void MacroAssembler::verify_FPU(int stack_depth, const char* s) {
3283 // %%%%% need to implement this
3284 }
3285
3286 void MacroAssembler::push_IU_state() {
3287 // %%%%% need to implement this
3288 }
3289
3290
3291 void MacroAssembler::pop_IU_state() {
3292 // %%%%% need to implement this
3293 }
3294
3295
3296 void MacroAssembler::push_FPU_state() {
3297 // %%%%% need to implement this
3298 }
3299
3300
3301 void MacroAssembler::pop_FPU_state() {
3302 // %%%%% need to implement this
3303 }
3304
3305
3306 void MacroAssembler::push_CPU_state() {
3307 // %%%%% need to implement this
3308 }
3309
3310
3311 void MacroAssembler::pop_CPU_state() {
3312 // %%%%% need to implement this
3313 }
3314
3315
3316
3317 void MacroAssembler::verify_tlab() {
3318 #ifdef ASSERT
3319 if (UseTLAB && VerifyOops) {
3320 Label next, next2, ok;
3321 Register t1 = L0;
3322 Register t2 = L1;
3323 Register t3 = L2;
3324
3325 save_frame(0);
3326 ld_ptr(G2_thread, in_bytes(JavaThread::tlab_top_offset()), t1);
3327 ld_ptr(G2_thread, in_bytes(JavaThread::tlab_start_offset()), t2);
3328 or3(t1, t2, t3);
3329 cmp(t1, t2);
3330 br(Assembler::greaterEqual, false, Assembler::pn, next);
3331 delayed()->nop();
3332 stop("assert(top >= start)");
3333 should_not_reach_here();
3334
3335 bind(next);
3336 ld_ptr(G2_thread, in_bytes(JavaThread::tlab_top_offset()), t1);
3337 ld_ptr(G2_thread, in_bytes(JavaThread::tlab_end_offset()), t2);
3338 or3(t3, t2, t3);
3339 cmp(t1, t2);
3340 br(Assembler::lessEqual, false, Assembler::pn, next2);
3341 delayed()->nop();
3342 stop("assert(top <= end)");
3343 should_not_reach_here();
3344
3345 bind(next2);
3346 and3(t3, MinObjAlignmentInBytesMask, t3);
3347 cmp(t3, 0);
3348 br(Assembler::lessEqual, false, Assembler::pn, ok);
3349 delayed()->nop();
3350 stop("assert(aligned)");
3351 should_not_reach_here();
3352
3353 bind(ok);
3354 restore();
3355 }
3356 #endif
3357 }
3358
3359
3360 void MacroAssembler::eden_allocate(
3361 Register obj, // result: pointer to object after successful allocation
3362 Register var_size_in_bytes, // object size in bytes if unknown at compile time; invalid otherwise
3363 int con_size_in_bytes, // object size in bytes if known at compile time
3364 Register t1, // temp register
3365 Register t2, // temp register
3366 Label& slow_case // continuation point if fast allocation fails
3367 ){
3368 // make sure arguments make sense
3369 assert_different_registers(obj, var_size_in_bytes, t1, t2);
3370 assert(0 <= con_size_in_bytes && Assembler::is_simm13(con_size_in_bytes), "illegal object size");
3371 assert((con_size_in_bytes & MinObjAlignmentInBytesMask) == 0, "object size is not multiple of alignment");
3372
3373 if (CMSIncrementalMode || !Universe::heap()->supports_inline_contig_alloc()) {
3374 // No allocation in the shared eden.
3375 br(Assembler::always, false, Assembler::pt, slow_case);
3376 delayed()->nop();
3377 } else {
3378 // get eden boundaries
3379 // note: we need both top & top_addr!
3380 const Register top_addr = t1;
3381 const Register end = t2;
3382
3383 CollectedHeap* ch = Universe::heap();
3384 set((intx)ch->top_addr(), top_addr);
3385 intx delta = (intx)ch->end_addr() - (intx)ch->top_addr();
3386 ld_ptr(top_addr, delta, end);
3387 ld_ptr(top_addr, 0, obj);
3388
3389 // try to allocate
3390 Label retry;
3391 bind(retry);
3392 #ifdef ASSERT
3393 // make sure eden top is properly aligned
3394 {
3395 Label L;
3396 btst(MinObjAlignmentInBytesMask, obj);
3397 br(Assembler::zero, false, Assembler::pt, L);
3398 delayed()->nop();
3399 stop("eden top is not properly aligned");
3400 bind(L);
3401 }
3402 #endif // ASSERT
3403 const Register free = end;
3404 sub(end, obj, free); // compute amount of free space
3405 if (var_size_in_bytes->is_valid()) {
3406 // size is unknown at compile time
3407 cmp(free, var_size_in_bytes);
3408 br(Assembler::lessUnsigned, false, Assembler::pn, slow_case); // if there is not enough space go the slow case
3409 delayed()->add(obj, var_size_in_bytes, end);
3410 } else {
3411 // size is known at compile time
3412 cmp(free, con_size_in_bytes);
3413 br(Assembler::lessUnsigned, false, Assembler::pn, slow_case); // if there is not enough space go the slow case
3414 delayed()->add(obj, con_size_in_bytes, end);
3415 }
3416 // Compare obj with the value at top_addr; if still equal, swap the value of
3417 // end with the value at top_addr. If not equal, read the value at top_addr
3418 // into end.
3419 casx_under_lock(top_addr, obj, end, (address)StubRoutines::Sparc::atomic_memory_operation_lock_addr());
3420 // if someone beat us on the allocation, try again, otherwise continue
3421 cmp(obj, end);
3422 brx(Assembler::notEqual, false, Assembler::pn, retry);
3423 delayed()->mov(end, obj); // nop if successfull since obj == end
3424
3425 #ifdef ASSERT
3426 // make sure eden top is properly aligned
3427 {
3428 Label L;
3429 const Register top_addr = t1;
3430
3431 set((intx)ch->top_addr(), top_addr);
3432 ld_ptr(top_addr, 0, top_addr);
3433 btst(MinObjAlignmentInBytesMask, top_addr);
3434 br(Assembler::zero, false, Assembler::pt, L);
3435 delayed()->nop();
3436 stop("eden top is not properly aligned");
3437 bind(L);
3438 }
3439 #endif // ASSERT
3440 }
3441 }
3442
3443
3444 void MacroAssembler::tlab_allocate(
3445 Register obj, // result: pointer to object after successful allocation
3446 Register var_size_in_bytes, // object size in bytes if unknown at compile time; invalid otherwise
3447 int con_size_in_bytes, // object size in bytes if known at compile time
3448 Register t1, // temp register
3449 Label& slow_case // continuation point if fast allocation fails
3450 ){
3451 // make sure arguments make sense
3452 assert_different_registers(obj, var_size_in_bytes, t1);
3453 assert(0 <= con_size_in_bytes && is_simm13(con_size_in_bytes), "illegal object size");
3454 assert((con_size_in_bytes & MinObjAlignmentInBytesMask) == 0, "object size is not multiple of alignment");
3455
3456 const Register free = t1;
3457
3458 verify_tlab();
3459
3460 ld_ptr(G2_thread, in_bytes(JavaThread::tlab_top_offset()), obj);
3461
3462 // calculate amount of free space
3463 ld_ptr(G2_thread, in_bytes(JavaThread::tlab_end_offset()), free);
3464 sub(free, obj, free);
3465
3466 Label done;
3467 if (var_size_in_bytes == noreg) {
3468 cmp(free, con_size_in_bytes);
3469 } else {
3470 cmp(free, var_size_in_bytes);
3471 }
3472 br(Assembler::less, false, Assembler::pn, slow_case);
3473 // calculate the new top pointer
3474 if (var_size_in_bytes == noreg) {
3475 delayed()->add(obj, con_size_in_bytes, free);
3476 } else {
3477 delayed()->add(obj, var_size_in_bytes, free);
3478 }
3479
3480 bind(done);
3481
3482 #ifdef ASSERT
3483 // make sure new free pointer is properly aligned
3484 {
3485 Label L;
3486 btst(MinObjAlignmentInBytesMask, free);
3487 br(Assembler::zero, false, Assembler::pt, L);
3488 delayed()->nop();
3489 stop("updated TLAB free is not properly aligned");
3490 bind(L);
3491 }
3492 #endif // ASSERT
3493
3494 // update the tlab top pointer
3495 st_ptr(free, G2_thread, in_bytes(JavaThread::tlab_top_offset()));
3496 verify_tlab();
3497 }
3498
3499
3500 void MacroAssembler::tlab_refill(Label& retry, Label& try_eden, Label& slow_case) {
3501 Register top = O0;
3502 Register t1 = G1;
3503 Register t2 = G3;
3504 Register t3 = O1;
3505 assert_different_registers(top, t1, t2, t3, G4, G5 /* preserve G4 and G5 */);
3506 Label do_refill, discard_tlab;
3507
3508 if (CMSIncrementalMode || !Universe::heap()->supports_inline_contig_alloc()) {
3509 // No allocation in the shared eden.
3510 br(Assembler::always, false, Assembler::pt, slow_case);
3511 delayed()->nop();
3512 }
3513
3514 ld_ptr(G2_thread, in_bytes(JavaThread::tlab_top_offset()), top);
3515 ld_ptr(G2_thread, in_bytes(JavaThread::tlab_end_offset()), t1);
3516 ld_ptr(G2_thread, in_bytes(JavaThread::tlab_refill_waste_limit_offset()), t2);
3517
3518 // calculate amount of free space
3519 sub(t1, top, t1);
3520 srl_ptr(t1, LogHeapWordSize, t1);
3521
3522 // Retain tlab and allocate object in shared space if
3523 // the amount free in the tlab is too large to discard.
3524 cmp(t1, t2);
3525 brx(Assembler::lessEqual, false, Assembler::pt, discard_tlab);
3526
3527 // increment waste limit to prevent getting stuck on this slow path
3528 delayed()->add(t2, ThreadLocalAllocBuffer::refill_waste_limit_increment(), t2);
3529 st_ptr(t2, G2_thread, in_bytes(JavaThread::tlab_refill_waste_limit_offset()));
3530 if (TLABStats) {
3531 // increment number of slow_allocations
3532 ld(G2_thread, in_bytes(JavaThread::tlab_slow_allocations_offset()), t2);
3533 add(t2, 1, t2);
3534 stw(t2, G2_thread, in_bytes(JavaThread::tlab_slow_allocations_offset()));
3535 }
3536 br(Assembler::always, false, Assembler::pt, try_eden);
3537 delayed()->nop();
3538
3539 bind(discard_tlab);
3540 if (TLABStats) {
3541 // increment number of refills
3542 ld(G2_thread, in_bytes(JavaThread::tlab_number_of_refills_offset()), t2);
3543 add(t2, 1, t2);
3544 stw(t2, G2_thread, in_bytes(JavaThread::tlab_number_of_refills_offset()));
3545 // accumulate wastage
3546 ld(G2_thread, in_bytes(JavaThread::tlab_fast_refill_waste_offset()), t2);
3547 add(t2, t1, t2);
3548 stw(t2, G2_thread, in_bytes(JavaThread::tlab_fast_refill_waste_offset()));
3549 }
3550
3551 // if tlab is currently allocated (top or end != null) then
3552 // fill [top, end + alignment_reserve) with array object
3553 br_null(top, false, Assembler::pn, do_refill);
3554 delayed()->nop();
3555
3556 set((intptr_t)markOopDesc::prototype()->copy_set_hash(0x2), t2);
3557 st_ptr(t2, top, oopDesc::mark_offset_in_bytes()); // set up the mark word
3558 // set klass to intArrayKlass
3559 sub(t1, typeArrayOopDesc::header_size(T_INT), t1);
3560 add(t1, ThreadLocalAllocBuffer::alignment_reserve(), t1);
3561 sll_ptr(t1, log2_intptr(HeapWordSize/sizeof(jint)), t1);
3562 st(t1, top, arrayOopDesc::length_offset_in_bytes());
3563 set((intptr_t)Universe::intArrayKlassObj_addr(), t2);
3564 ld_ptr(t2, 0, t2);
3565 // store klass last. concurrent gcs assumes klass length is valid if
3566 // klass field is not null.
3567 store_klass(t2, top);
3568 verify_oop(top);
3569
3570 // refill the tlab with an eden allocation
3571 bind(do_refill);
3572 ld_ptr(G2_thread, in_bytes(JavaThread::tlab_size_offset()), t1);
3573 sll_ptr(t1, LogHeapWordSize, t1);
3574 // add object_size ??
3575 eden_allocate(top, t1, 0, t2, t3, slow_case);
3576
3577 st_ptr(top, G2_thread, in_bytes(JavaThread::tlab_start_offset()));
3578 st_ptr(top, G2_thread, in_bytes(JavaThread::tlab_top_offset()));
3579 #ifdef ASSERT
3580 // check that tlab_size (t1) is still valid
3581 {
3582 Label ok;
3583 ld_ptr(G2_thread, in_bytes(JavaThread::tlab_size_offset()), t2);
3584 sll_ptr(t2, LogHeapWordSize, t2);
3585 cmp(t1, t2);
3586 br(Assembler::equal, false, Assembler::pt, ok);
3587 delayed()->nop();
3588 stop("assert(t1 == tlab_size)");
3589 should_not_reach_here();
3590
3591 bind(ok);
3592 }
3593 #endif // ASSERT
3594 add(top, t1, top); // t1 is tlab_size
3595 sub(top, ThreadLocalAllocBuffer::alignment_reserve_in_bytes(), top);
3596 st_ptr(top, G2_thread, in_bytes(JavaThread::tlab_end_offset()));
3597 verify_tlab();
3598 br(Assembler::always, false, Assembler::pt, retry);
3599 delayed()->nop();
3600 }
3601
3602 Assembler::Condition MacroAssembler::negate_condition(Assembler::Condition cond) {
3603 switch (cond) {
3604 // Note some conditions are synonyms for others
3605 case Assembler::never: return Assembler::always;
3606 case Assembler::zero: return Assembler::notZero;
3607 case Assembler::lessEqual: return Assembler::greater;
3608 case Assembler::less: return Assembler::greaterEqual;
3609 case Assembler::lessEqualUnsigned: return Assembler::greaterUnsigned;
3610 case Assembler::lessUnsigned: return Assembler::greaterEqualUnsigned;
3611 case Assembler::negative: return Assembler::positive;
3612 case Assembler::overflowSet: return Assembler::overflowClear;
3613 case Assembler::always: return Assembler::never;
3614 case Assembler::notZero: return Assembler::zero;
3615 case Assembler::greater: return Assembler::lessEqual;
3616 case Assembler::greaterEqual: return Assembler::less;
3617 case Assembler::greaterUnsigned: return Assembler::lessEqualUnsigned;
3618 case Assembler::greaterEqualUnsigned: return Assembler::lessUnsigned;
3619 case Assembler::positive: return Assembler::negative;
3620 case Assembler::overflowClear: return Assembler::overflowSet;
3621 }
3622
3623 ShouldNotReachHere(); return Assembler::overflowClear;
3624 }
3625
3626 void MacroAssembler::cond_inc(Assembler::Condition cond, address counter_ptr,
3627 Register Rtmp1, Register Rtmp2 /*, Register Rtmp3, Register Rtmp4 */) {
3628 Condition negated_cond = negate_condition(cond);
3629 Label L;
3630 brx(negated_cond, false, Assembler::pt, L);
3631 delayed()->nop();
3632 inc_counter(counter_ptr, Rtmp1, Rtmp2);
3633 bind(L);
3634 }
3635
3636 void MacroAssembler::inc_counter(address counter_ptr, Register Rtmp1, Register Rtmp2) {
3637 Address counter_addr(Rtmp1, counter_ptr);
3638 load_contents(counter_addr, Rtmp2);
3639 inc(Rtmp2);
3640 store_contents(Rtmp2, counter_addr);
3641 }
3642
3643 SkipIfEqual::SkipIfEqual(
3644 MacroAssembler* masm, Register temp, const bool* flag_addr,
3645 Assembler::Condition condition) {
3646 _masm = masm;
3647 Address flag(temp, (address)flag_addr, relocInfo::none);
3648 _masm->sethi(flag);
3649 _masm->ldub(flag, temp);
3650 _masm->tst(temp);
3651 _masm->br(condition, false, Assembler::pt, _label);
3652 _masm->delayed()->nop();
3653 }
3654
3655 SkipIfEqual::~SkipIfEqual() {
3656 _masm->bind(_label);
3657 }
3658
3659
3660 // Writes to stack successive pages until offset reached to check for
3661 // stack overflow + shadow pages. This clobbers tsp and scratch.
3662 void MacroAssembler::bang_stack_size(Register Rsize, Register Rtsp,
3663 Register Rscratch) {
3664 // Use stack pointer in temp stack pointer
3665 mov(SP, Rtsp);
3666
3667 // Bang stack for total size given plus stack shadow page size.
3668 // Bang one page at a time because a large size can overflow yellow and
3669 // red zones (the bang will fail but stack overflow handling can't tell that
3670 // it was a stack overflow bang vs a regular segv).
3671 int offset = os::vm_page_size();
3672 Register Roffset = Rscratch;
3673
3674 Label loop;
3675 bind(loop);
3676 set((-offset)+STACK_BIAS, Rscratch);
3677 st(G0, Rtsp, Rscratch);
3678 set(offset, Roffset);
3679 sub(Rsize, Roffset, Rsize);
3680 cmp(Rsize, G0);
3681 br(Assembler::greater, false, Assembler::pn, loop);
3682 delayed()->sub(Rtsp, Roffset, Rtsp);
3683
3684 // Bang down shadow pages too.
3685 // The -1 because we already subtracted 1 page.
3686 for (int i = 0; i< StackShadowPages-1; i++) {
3687 set((-i*offset)+STACK_BIAS, Rscratch);
3688 st(G0, Rtsp, Rscratch);
3689 }
3690 }
3691
3692 ///////////////////////////////////////////////////////////////////////////////////
3693 #ifndef SERIALGC
3694
3695 static uint num_stores = 0;
3696 static uint num_null_pre_stores = 0;
3697
3698 static void count_null_pre_vals(void* pre_val) {
3699 num_stores++;
3700 if (pre_val == NULL) num_null_pre_stores++;
3701 if ((num_stores % 1000000) == 0) {
3702 tty->print_cr(UINT32_FORMAT " stores, " UINT32_FORMAT " (%5.2f%%) with null pre-vals.",
3703 num_stores, num_null_pre_stores,
3704 100.0*(float)num_null_pre_stores/(float)num_stores);
3705 }
3706 }
3707
3708 static address satb_log_enqueue_with_frame = 0;
3709 static u_char* satb_log_enqueue_with_frame_end = 0;
3710
3711 static address satb_log_enqueue_frameless = 0;
3712 static u_char* satb_log_enqueue_frameless_end = 0;
3713
3714 static int EnqueueCodeSize = 128 DEBUG_ONLY( + 256); // Instructions?
3715
3716 // The calls to this don't work. We'd need to do a fair amount of work to
3717 // make it work.
3718 static void check_index(int ind) {
3719 assert(0 <= ind && ind <= 64*K && ((ind % oopSize) == 0),
3720 "Invariants.")
3721 }
3722
3723 static void generate_satb_log_enqueue(bool with_frame) {
3724 BufferBlob* bb = BufferBlob::create("enqueue_with_frame", EnqueueCodeSize);
3725 CodeBuffer buf(bb->instructions_begin(), bb->instructions_size());
3726 MacroAssembler masm(&buf);
3727 address start = masm.pc();
3728 Register pre_val;
3729
3730 Label refill, restart;
3731 if (with_frame) {
3732 masm.save_frame(0);
3733 pre_val = I0; // Was O0 before the save.
3734 } else {
3735 pre_val = O0;
3736 }
3737 int satb_q_index_byte_offset =
3738 in_bytes(JavaThread::satb_mark_queue_offset() +
3739 PtrQueue::byte_offset_of_index());
3740 int satb_q_buf_byte_offset =
3741 in_bytes(JavaThread::satb_mark_queue_offset() +
3742 PtrQueue::byte_offset_of_buf());
3743 assert(in_bytes(PtrQueue::byte_width_of_index()) == sizeof(intptr_t) &&
3744 in_bytes(PtrQueue::byte_width_of_buf()) == sizeof(intptr_t),
3745 "check sizes in assembly below");
3746
3747 masm.bind(restart);
3748 masm.ld_ptr(G2_thread, satb_q_index_byte_offset, L0);
3749
3750 masm.br_on_reg_cond(Assembler::rc_z, /*annul*/false, Assembler::pn, L0, refill);
3751 // If the branch is taken, no harm in executing this in the delay slot.
3752 masm.delayed()->ld_ptr(G2_thread, satb_q_buf_byte_offset, L1);
3753 masm.sub(L0, oopSize, L0);
3754
3755 masm.st_ptr(pre_val, L1, L0); // [_buf + index] := I0
3756 if (!with_frame) {
3757 // Use return-from-leaf
3758 masm.retl();
3759 masm.delayed()->st_ptr(L0, G2_thread, satb_q_index_byte_offset);
3760 } else {
3761 // Not delayed.
3762 masm.st_ptr(L0, G2_thread, satb_q_index_byte_offset);
3763 }
3764 if (with_frame) {
3765 masm.ret();
3766 masm.delayed()->restore();
3767 }
3768 masm.bind(refill);
3769
3770 address handle_zero =
3771 CAST_FROM_FN_PTR(address,
3772 &SATBMarkQueueSet::handle_zero_index_for_thread);
3773 // This should be rare enough that we can afford to save all the
3774 // scratch registers that the calling context might be using.
3775 masm.mov(G1_scratch, L0);
3776 masm.mov(G3_scratch, L1);
3777 masm.mov(G4, L2);
3778 // We need the value of O0 above (for the write into the buffer), so we
3779 // save and restore it.
3780 masm.mov(O0, L3);
3781 // Since the call will overwrite O7, we save and restore that, as well.
3782 masm.mov(O7, L4);
3783 masm.call_VM_leaf(L5, handle_zero, G2_thread);
3784 masm.mov(L0, G1_scratch);
3785 masm.mov(L1, G3_scratch);
3786 masm.mov(L2, G4);
3787 masm.mov(L3, O0);
3788 masm.br(Assembler::always, /*annul*/false, Assembler::pt, restart);
3789 masm.delayed()->mov(L4, O7);
3790
3791 if (with_frame) {
3792 satb_log_enqueue_with_frame = start;
3793 satb_log_enqueue_with_frame_end = masm.pc();
3794 } else {
3795 satb_log_enqueue_frameless = start;
3796 satb_log_enqueue_frameless_end = masm.pc();
3797 }
3798 }
3799
3800 static inline void generate_satb_log_enqueue_if_necessary(bool with_frame) {
3801 if (with_frame) {
3802 if (satb_log_enqueue_with_frame == 0) {
3803 generate_satb_log_enqueue(with_frame);
3804 assert(satb_log_enqueue_with_frame != 0, "postcondition.");
3805 if (G1SATBPrintStubs) {
3806 tty->print_cr("Generated with-frame satb enqueue:");
3807 Disassembler::decode((u_char*)satb_log_enqueue_with_frame,
3808 satb_log_enqueue_with_frame_end,
3809 tty);
3810 }
3811 }
3812 } else {
3813 if (satb_log_enqueue_frameless == 0) {
3814 generate_satb_log_enqueue(with_frame);
3815 assert(satb_log_enqueue_frameless != 0, "postcondition.");
3816 if (G1SATBPrintStubs) {
3817 tty->print_cr("Generated frameless satb enqueue:");
3818 Disassembler::decode((u_char*)satb_log_enqueue_frameless,
3819 satb_log_enqueue_frameless_end,
3820 tty);
3821 }
3822 }
3823 }
3824 }
3825
3826 void MacroAssembler::g1_write_barrier_pre(Register obj, Register index, int offset, Register tmp, bool preserve_o_regs) {
3827 assert(offset == 0 || index == noreg, "choose one");
3828
3829 if (G1DisablePreBarrier) return;
3830 // satb_log_barrier(tmp, obj, offset, preserve_o_regs);
3831 Label filtered;
3832 // satb_log_barrier_work0(tmp, filtered);
3833 if (in_bytes(PtrQueue::byte_width_of_active()) == 4) {
3834 ld(G2,
3835 in_bytes(JavaThread::satb_mark_queue_offset() +
3836 PtrQueue::byte_offset_of_active()),
3837 tmp);
3838 } else {
3839 guarantee(in_bytes(PtrQueue::byte_width_of_active()) == 1,
3840 "Assumption");
3841 ldsb(G2,
3842 in_bytes(JavaThread::satb_mark_queue_offset() +
3843 PtrQueue::byte_offset_of_active()),
3844 tmp);
3845 }
3846 // Check on whether to annul.
3847 br_on_reg_cond(rc_z, /*annul*/false, Assembler::pt, tmp, filtered);
3848 delayed() -> nop();
3849
3850 // satb_log_barrier_work1(tmp, offset);
3851 if (index == noreg) {
3852 if (Assembler::is_simm13(offset)) {
3853 ld_ptr(obj, offset, tmp);
3854 } else {
3855 set(offset, tmp);
3856 ld_ptr(obj, tmp, tmp);
3857 }
3858 } else {
3859 ld_ptr(obj, index, tmp);
3860 }
3861
3862 // satb_log_barrier_work2(obj, tmp, offset);
3863
3864 // satb_log_barrier_work3(tmp, filtered, preserve_o_regs);
3865
3866 const Register pre_val = tmp;
3867
3868 if (G1SATBBarrierPrintNullPreVals) {
3869 save_frame(0);
3870 mov(pre_val, O0);
3871 // Save G-regs that target may use.
3872 mov(G1, L1);
3873 mov(G2, L2);
3874 mov(G3, L3);
3875 mov(G4, L4);
3876 mov(G5, L5);
3877 call(CAST_FROM_FN_PTR(address, &count_null_pre_vals));
3878 delayed()->nop();
3879 // Restore G-regs that target may have used.
3880 mov(L1, G1);
3881 mov(L2, G2);
3882 mov(L3, G3);
3883 mov(L4, G4);
3884 mov(L5, G5);
3885 restore(G0, G0, G0);
3886 }
3887
3888 // Check on whether to annul.
3889 br_on_reg_cond(rc_z, /*annul*/false, Assembler::pt, pre_val, filtered);
3890 delayed() -> nop();
3891
3892 // OK, it's not filtered, so we'll need to call enqueue. In the normal
3893 // case, pre_val will be a scratch G-reg, but there's some cases in which
3894 // it's an O-reg. In the first case, do a normal call. In the latter,
3895 // do a save here and call the frameless version.
3896
3897 guarantee(pre_val->is_global() || pre_val->is_out(),
3898 "Or we need to think harder.");
3899 if (pre_val->is_global() && !preserve_o_regs) {
3900 generate_satb_log_enqueue_if_necessary(true); // with frame.
3901 call(satb_log_enqueue_with_frame);
3902 delayed()->mov(pre_val, O0);
3903 } else {
3904 generate_satb_log_enqueue_if_necessary(false); // with frameless.
3905 save_frame(0);
3906 call(satb_log_enqueue_frameless);
3907 delayed()->mov(pre_val->after_save(), O0);
3908 restore();
3909 }
3910
3911 bind(filtered);
3912 }
3913
3914 static jint num_ct_writes = 0;
3915 static jint num_ct_writes_filtered_in_hr = 0;
3916 static jint num_ct_writes_filtered_null = 0;
3917 static jint num_ct_writes_filtered_pop = 0;
3918 static G1CollectedHeap* g1 = NULL;
3919
3920 static Thread* count_ct_writes(void* filter_val, void* new_val) {
3921 Atomic::inc(&num_ct_writes);
3922 if (filter_val == NULL) {
3923 Atomic::inc(&num_ct_writes_filtered_in_hr);
3924 } else if (new_val == NULL) {
3925 Atomic::inc(&num_ct_writes_filtered_null);
3926 } else {
3927 if (g1 == NULL) {
3928 g1 = G1CollectedHeap::heap();
3929 }
3930 if ((HeapWord*)new_val < g1->popular_object_boundary()) {
3931 Atomic::inc(&num_ct_writes_filtered_pop);
3932 }
3933 }
3934 if ((num_ct_writes % 1000000) == 0) {
3935 jint num_ct_writes_filtered =
3936 num_ct_writes_filtered_in_hr +
3937 num_ct_writes_filtered_null +
3938 num_ct_writes_filtered_pop;
3939
3940 tty->print_cr("%d potential CT writes: %5.2f%% filtered\n"
3941 " (%5.2f%% intra-HR, %5.2f%% null, %5.2f%% popular).",
3942 num_ct_writes,
3943 100.0*(float)num_ct_writes_filtered/(float)num_ct_writes,
3944 100.0*(float)num_ct_writes_filtered_in_hr/
3945 (float)num_ct_writes,
3946 100.0*(float)num_ct_writes_filtered_null/
3947 (float)num_ct_writes,
3948 100.0*(float)num_ct_writes_filtered_pop/
3949 (float)num_ct_writes);
3950 }
3951 return Thread::current();
3952 }
3953
3954 static address dirty_card_log_enqueue = 0;
3955 static u_char* dirty_card_log_enqueue_end = 0;
3956
3957 // This gets to assume that o0 contains the object address.
3958 static void generate_dirty_card_log_enqueue(jbyte* byte_map_base) {
3959 BufferBlob* bb = BufferBlob::create("dirty_card_enqueue", EnqueueCodeSize*2);
3960 CodeBuffer buf(bb->instructions_begin(), bb->instructions_size());
3961 MacroAssembler masm(&buf);
3962 address start = masm.pc();
3963
3964 Label not_already_dirty, restart, refill;
3965
3966 #ifdef _LP64
3967 masm.srlx(O0, CardTableModRefBS::card_shift, O0);
3968 #else
3969 masm.srl(O0, CardTableModRefBS::card_shift, O0);
3970 #endif
3971 Address rs(O1, (address)byte_map_base);
3972 masm.load_address(rs); // O1 := <card table base>
3973 masm.ldub(O0, O1, O2); // O2 := [O0 + O1]
3974
3975 masm.br_on_reg_cond(Assembler::rc_nz, /*annul*/false, Assembler::pt,
3976 O2, not_already_dirty);
3977 // Get O1 + O2 into a reg by itself -- useful in the take-the-branch
3978 // case, harmless if not.
3979 masm.delayed()->add(O0, O1, O3);
3980
3981 // We didn't take the branch, so we're already dirty: return.
3982 // Use return-from-leaf
3983 masm.retl();
3984 masm.delayed()->nop();
3985
3986 // Not dirty.
3987 masm.bind(not_already_dirty);
3988 // First, dirty it.
3989 masm.stb(G0, O3, G0); // [cardPtr] := 0 (i.e., dirty).
3990 int dirty_card_q_index_byte_offset =
3991 in_bytes(JavaThread::dirty_card_queue_offset() +
3992 PtrQueue::byte_offset_of_index());
3993 int dirty_card_q_buf_byte_offset =
3994 in_bytes(JavaThread::dirty_card_queue_offset() +
3995 PtrQueue::byte_offset_of_buf());
3996 masm.bind(restart);
3997 masm.ld_ptr(G2_thread, dirty_card_q_index_byte_offset, L0);
3998
3999 masm.br_on_reg_cond(Assembler::rc_z, /*annul*/false, Assembler::pn,
4000 L0, refill);
4001 // If the branch is taken, no harm in executing this in the delay slot.
4002 masm.delayed()->ld_ptr(G2_thread, dirty_card_q_buf_byte_offset, L1);
4003 masm.sub(L0, oopSize, L0);
4004
4005 masm.st_ptr(O3, L1, L0); // [_buf + index] := I0
4006 // Use return-from-leaf
4007 masm.retl();
4008 masm.delayed()->st_ptr(L0, G2_thread, dirty_card_q_index_byte_offset);
4009
4010 masm.bind(refill);
4011 address handle_zero =
4012 CAST_FROM_FN_PTR(address,
4013 &DirtyCardQueueSet::handle_zero_index_for_thread);
4014 // This should be rare enough that we can afford to save all the
4015 // scratch registers that the calling context might be using.
4016 masm.mov(G1_scratch, L3);
4017 masm.mov(G3_scratch, L5);
4018 // We need the value of O3 above (for the write into the buffer), so we
4019 // save and restore it.
4020 masm.mov(O3, L6);
4021 // Since the call will overwrite O7, we save and restore that, as well.
4022 masm.mov(O7, L4);
4023
4024 masm.call_VM_leaf(L7_thread_cache, handle_zero, G2_thread);
4025 masm.mov(L3, G1_scratch);
4026 masm.mov(L5, G3_scratch);
4027 masm.mov(L6, O3);
4028 masm.br(Assembler::always, /*annul*/false, Assembler::pt, restart);
4029 masm.delayed()->mov(L4, O7);
4030
4031 dirty_card_log_enqueue = start;
4032 dirty_card_log_enqueue_end = masm.pc();
4033 // XXX Should have a guarantee here about not going off the end!
4034 // Does it already do so? Do an experiment...
4035 }
4036
4037 static inline void
4038 generate_dirty_card_log_enqueue_if_necessary(jbyte* byte_map_base) {
4039 if (dirty_card_log_enqueue == 0) {
4040 generate_dirty_card_log_enqueue(byte_map_base);
4041 assert(dirty_card_log_enqueue != 0, "postcondition.");
4042 if (G1SATBPrintStubs) {
4043 tty->print_cr("Generated dirty_card enqueue:");
4044 Disassembler::decode((u_char*)dirty_card_log_enqueue,
4045 dirty_card_log_enqueue_end,
4046 tty);
4047 }
4048 }
4049 }
4050
4051
4052 void MacroAssembler::g1_write_barrier_post(Register store_addr, Register new_val, Register tmp) {
4053
4054 Label filtered;
4055 MacroAssembler* post_filter_masm = this;
4056
4057 if (new_val == G0) return;
4058 if (G1DisablePostBarrier) return;
4059
4060 G1SATBCardTableModRefBS* bs = (G1SATBCardTableModRefBS*) Universe::heap()->barrier_set();
4061 assert(bs->kind() == BarrierSet::G1SATBCT ||
4062 bs->kind() == BarrierSet::G1SATBCTLogging, "wrong barrier");
4063 if (G1RSBarrierRegionFilter) {
4064 xor3(store_addr, new_val, tmp);
4065 #ifdef _LP64
4066 srlx(tmp, HeapRegion::LogOfHRGrainBytes, tmp);
4067 #else
4068 srl(tmp, HeapRegion::LogOfHRGrainBytes, tmp);
4069 #endif
4070 if (G1PrintCTFilterStats) {
4071 guarantee(tmp->is_global(), "Or stats won't work...");
4072 // This is a sleazy hack: I'm temporarily hijacking G2, which I
4073 // promise to restore.
4074 mov(new_val, G2);
4075 save_frame(0);
4076 mov(tmp, O0);
4077 mov(G2, O1);
4078 // Save G-regs that target may use.
4079 mov(G1, L1);
4080 mov(G2, L2);
4081 mov(G3, L3);
4082 mov(G4, L4);
4083 mov(G5, L5);
4084 call(CAST_FROM_FN_PTR(address, &count_ct_writes));
4085 delayed()->nop();
4086 mov(O0, G2);
4087 // Restore G-regs that target may have used.
4088 mov(L1, G1);
4089 mov(L3, G3);
4090 mov(L4, G4);
4091 mov(L5, G5);
4092 restore(G0, G0, G0);
4093 }
4094 // XXX Should I predict this taken or not? Does it mattern?
4095 br_on_reg_cond(rc_z, /*annul*/false, Assembler::pt, tmp, filtered);
4096 delayed()->nop();
4097 }
4098
4099 // Now we decide how to generate the card table write. If we're
4100 // enqueueing, we call out to a generated function. Otherwise, we do it
4101 // inline here.
4102
4103 if (G1RSBarrierUseQueue) {
4104 // If the "store_addr" register is an "in" or "local" register, move it to
4105 // a scratch reg so we can pass it as an argument.
4106 bool use_scr = !(store_addr->is_global() || store_addr->is_out());
4107 // Pick a scratch register different from "tmp".
4108 Register scr = (tmp == G1_scratch ? G3_scratch : G1_scratch);
4109 // Make sure we use up the delay slot!
4110 if (use_scr) {
4111 post_filter_masm->mov(store_addr, scr);
4112 } else {
4113 post_filter_masm->nop();
4114 }
4115 generate_dirty_card_log_enqueue_if_necessary(bs->byte_map_base);
4116 save_frame(0);
4117 call(dirty_card_log_enqueue);
4118 if (use_scr) {
4119 delayed()->mov(scr, O0);
4120 } else {
4121 delayed()->mov(store_addr->after_save(), O0);
4122 }
4123 restore();
4124
4125 } else {
4126
4127 #ifdef _LP64
4128 post_filter_masm->srlx(store_addr, CardTableModRefBS::card_shift, store_addr);
4129 #else
4130 post_filter_masm->srl(store_addr, CardTableModRefBS::card_shift, store_addr);
4131 #endif
4132 assert( tmp != store_addr, "need separate temp reg");
4133 Address rs(tmp, (address)bs->byte_map_base);
4134 load_address(rs);
4135 stb(G0, rs.base(), store_addr);
4136 }
4137
4138 bind(filtered);
4139
4140 }
4141
4142 #endif // SERIALGC
4143 ///////////////////////////////////////////////////////////////////////////////////
4144
4145 void MacroAssembler::card_write_barrier_post(Register store_addr, Register new_val, Register tmp) {
4146 // If we're writing constant NULL, we can skip the write barrier.
4147 if (new_val == G0) return;
4148 CardTableModRefBS* bs = (CardTableModRefBS*) Universe::heap()->barrier_set();
4149 assert(bs->kind() == BarrierSet::CardTableModRef ||
4150 bs->kind() == BarrierSet::CardTableExtension, "wrong barrier");
4151 card_table_write(bs->byte_map_base, tmp, store_addr);
4152 }
4153
4154 void MacroAssembler::load_klass(Register src_oop, Register klass) {
4155 // The number of bytes in this code is used by
4156 // MachCallDynamicJavaNode::ret_addr_offset()
4157 // if this changes, change that.
4158 if (UseCompressedOops) {
4159 lduw(src_oop, oopDesc::klass_offset_in_bytes(), klass);
4160 decode_heap_oop_not_null(klass);
4161 } else {
4162 ld_ptr(src_oop, oopDesc::klass_offset_in_bytes(), klass);
4163 }
4164 }
4165
4166 void MacroAssembler::store_klass(Register klass, Register dst_oop) {
4167 if (UseCompressedOops) {
4168 assert(dst_oop != klass, "not enough registers");
4169 encode_heap_oop_not_null(klass);
4170 st(klass, dst_oop, oopDesc::klass_offset_in_bytes());
4171 } else {
4172 st_ptr(klass, dst_oop, oopDesc::klass_offset_in_bytes());
4173 }
4174 }
4175
4176 void MacroAssembler::store_klass_gap(Register s, Register d) {
4177 if (UseCompressedOops) {
4178 assert(s != d, "not enough registers");
4179 st(s, d, oopDesc::klass_gap_offset_in_bytes());
4180 }
4181 }
4182
4183 void MacroAssembler::load_heap_oop(const Address& s, Register d, int offset) {
4184 if (UseCompressedOops) {
4185 lduw(s, d, offset);
4186 decode_heap_oop(d);
4187 } else {
4188 ld_ptr(s, d, offset);
4189 }
4190 }
4191
4192 void MacroAssembler::load_heap_oop(Register s1, Register s2, Register d) {
4193 if (UseCompressedOops) {
4194 lduw(s1, s2, d);
4195 decode_heap_oop(d, d);
4196 } else {
4197 ld_ptr(s1, s2, d);
4198 }
4199 }
4200
4201 void MacroAssembler::load_heap_oop(Register s1, int simm13a, Register d) {
4202 if (UseCompressedOops) {
4203 lduw(s1, simm13a, d);
4204 decode_heap_oop(d, d);
4205 } else {
4206 ld_ptr(s1, simm13a, d);
4207 }
4208 }
4209
4210 void MacroAssembler::store_heap_oop(Register d, Register s1, Register s2) {
4211 if (UseCompressedOops) {
4212 assert(s1 != d && s2 != d, "not enough registers");
4213 encode_heap_oop(d);
4214 st(d, s1, s2);
4215 } else {
4216 st_ptr(d, s1, s2);
4217 }
4218 }
4219
4220 void MacroAssembler::store_heap_oop(Register d, Register s1, int simm13a) {
4221 if (UseCompressedOops) {
4222 assert(s1 != d, "not enough registers");
4223 encode_heap_oop(d);
4224 st(d, s1, simm13a);
4225 } else {
4226 st_ptr(d, s1, simm13a);
4227 }
4228 }
4229
4230 void MacroAssembler::store_heap_oop(Register d, const Address& a, int offset) {
4231 if (UseCompressedOops) {
4232 assert(a.base() != d, "not enough registers");
4233 encode_heap_oop(d);
4234 st(d, a, offset);
4235 } else {
4236 st_ptr(d, a, offset);
4237 }
4238 }
4239
4240
4241 void MacroAssembler::encode_heap_oop(Register src, Register dst) {
4242 assert (UseCompressedOops, "must be compressed");
4243 verify_oop(src);
4244 Label done;
4245 if (src == dst) {
4246 // optimize for frequent case src == dst
4247 bpr(rc_nz, true, Assembler::pt, src, done);
4248 delayed() -> sub(src, G6_heapbase, dst); // annuled if not taken
4249 bind(done);
4250 srlx(src, LogMinObjAlignmentInBytes, dst);
4251 } else {
4252 bpr(rc_z, false, Assembler::pn, src, done);
4253 delayed() -> mov(G0, dst);
4254 // could be moved before branch, and annulate delay,
4255 // but may add some unneeded work decoding null
4256 sub(src, G6_heapbase, dst);
4257 srlx(dst, LogMinObjAlignmentInBytes, dst);
4258 bind(done);
4259 }
4260 }
4261
4262
4263 void MacroAssembler::encode_heap_oop_not_null(Register r) {
4264 assert (UseCompressedOops, "must be compressed");
4265 verify_oop(r);
4266 sub(r, G6_heapbase, r);
4267 srlx(r, LogMinObjAlignmentInBytes, r);
4268 }
4269
4270 void MacroAssembler::encode_heap_oop_not_null(Register src, Register dst) {
4271 assert (UseCompressedOops, "must be compressed");
4272 verify_oop(src);
4273 sub(src, G6_heapbase, dst);
4274 srlx(dst, LogMinObjAlignmentInBytes, dst);
4275 }
4276
4277 // Same algorithm as oops.inline.hpp decode_heap_oop.
4278 void MacroAssembler::decode_heap_oop(Register src, Register dst) {
4279 assert (UseCompressedOops, "must be compressed");
4280 Label done;
4281 sllx(src, LogMinObjAlignmentInBytes, dst);
4282 bpr(rc_nz, true, Assembler::pt, dst, done);
4283 delayed() -> add(dst, G6_heapbase, dst); // annuled if not taken
4284 bind(done);
4285 verify_oop(dst);
4286 }
4287
4288 void MacroAssembler::decode_heap_oop_not_null(Register r) {
4289 // Do not add assert code to this unless you change vtableStubs_sparc.cpp
4290 // pd_code_size_limit.
4291 // Also do not verify_oop as this is called by verify_oop.
4292 assert (UseCompressedOops, "must be compressed");
4293 sllx(r, LogMinObjAlignmentInBytes, r);
4294 add(r, G6_heapbase, r);
4295 }
4296
4297 void MacroAssembler::decode_heap_oop_not_null(Register src, Register dst) {
4298 // Do not add assert code to this unless you change vtableStubs_sparc.cpp
4299 // pd_code_size_limit.
4300 // Also do not verify_oop as this is called by verify_oop.
4301 assert (UseCompressedOops, "must be compressed");
4302 sllx(src, LogMinObjAlignmentInBytes, dst);
4303 add(dst, G6_heapbase, dst);
4304 }
4305
4306 void MacroAssembler::reinit_heapbase() {
4307 if (UseCompressedOops) {
4308 // call indirectly to solve generation ordering problem
4309 Address base(G6_heapbase, (address)Universe::heap_base_addr());
4310 load_ptr_contents(base, G6_heapbase);
4311 }
4312 }